Yaber V10 - iOS Screen Mirroring

=4 Support@yabertech.com
3.1.i0S Cast (for iOS Devices)
1.Go to home page - Select the [@] menu - Select the [ WiFi Setting ] menu
-- Open the WiFi function -- Select your home WiFi from the list -- Connect the
V10 projector to your home WiFi.
2Back to home page - Select [ iOS Cast] menu — Press the OK button to
enter the [0S Cast ] menu.
3.Select the [ Settings ] menu on your iOS device - Tum on the [ Wi-Fi]
function - Connect your iOS device to the same home network as the
projector.
4.0pen the [ Control Center ] on your iOS device — Select the [ Screen
Mirroring ] function — Select and connect the iOS Cast receiver named [
V10-00SCast-xxxx ] -- your iOS device screen will be displayed on the
projection screen after 3 seconds.
13