Yaber Y21 - Remote Unresponsive; Small Dots on Display; 3 D Effect Support; External Storage Issues

& How can | do if the remote is unresponsive?
*Make sure the batteries are installed correctly and the power s enough.
*The remote works with the projector through the IR receiver. The remote works only
when the IR receiver s within the direct reaction distance and will be unresponsive if the IR
receiver is blocked or covered
9.How should | do i there are small dots on display?
*It may be caused during installing or shipping, please contact YABER to get the video about
how to clean it.
10.Can this projector support 3D effect?
*The projector supports 3D video source, and 3D viewing performance is achievable
withRed-Blue 3D Glasses; but please understand the experience will not be better than in the
theater and we do not recommend it if you have a higher expectation about 3D effect.
11Why doesn't anything work in the main interface especially with external storage
connected?
*Correct input source must be selected when you use the USB disk or other device;
otherwise, No Signal will be shown on the screen.
12Why doesn't the projector’s lamp light up?
*Please contact YABER for assistance when this occurs.
13What kind of cable do | need when connecting TV BOX, Fire stick and DVD Player to the
projector?
*HDMI cable for all devices mentioned above. For some PC without HDMI port, VGA cable
will work. Certain DVD players require the AV cable connection.
14Why does some lag / jerky appear when playing video or play games?
* Due to the technical bottleneck of the current 1080p projectors, most of 1080p
projectors on the market cannot smoothly play 1080p/60fps videos. Hope you could
understanding.
Please change the 1080p/60fps to 1080p/30fps. If the problem cannot be resolved, please
contact service@yabertech.com.
17