1.Turn on the power supply, operate the lighting switch,
and check whether the headlights and taillights are on
and whether the headlights are normal.
2.Operate the turning switch, check whether the turning
indicator is working properly.
3.Check whether the appearance of lighting and signaling
devices are damaged.
4.Check whether the power line connection of the whole
scooter is stable and whether the binding posts and
connectors are loose.
1.Check whether the power-off function of front and rear
brake lever reducer is normal before and after
respectively. Whether the reducer brake system
is flexible to operate.
2.Check whether the braking performance and braking
distance are abnormal. If abnormal phenomena such as
soft brake, long braking distance, worn brake pads, low
flour of brake fluid or leakage of fluid were found,
please contact the dealer.
1.Check whether the reflector is dirt and damaged and
do not use it if there is dirt or damage.
2.Check whether the license plate is firmly installed,
the number is clear, and there is no dirt or damage.
23 24
Damage or contamination of the
reflector and the license
1.Swing the scooter up and down, back and forth,
left and right, and check the handlebars and front
and rear wheel fixing screws for looseness.
2.Whether the handlebar steering is too tight or bumpy.
3.Push the scooter forward and backward, and check
whether the front and rear wheels rotate smoothly
and whether there is abnormal noise.
Inspection of handlebar and front
and rear wheel
Inspection before riding
Inspection of power supply circuit and
lighting circuit
Inspection of front and rear brake
To Next Page
Loading...
Need help?
General
