5.INSPECTION, MAINTENANCE AND REPAIR
Dear customers:
Please check and maintain the scooter regularly . when
it is stopped for a long time, it should also be checked
regularly. Check and maintain the new scooter when
it travels 300 kilometers.
1.Choose a spacious and flat place to support the main support.
2.When driving inspection is required, it should be
carried out in a safe place and pay attention to
the surrounding safety.
3.If any abnormality is found through inspection,
please eliminate the abnormality before driving.
If it is difficult for you to solve the problem, the
maintenance station can be entrusted for inspection.
1.Shake the handlebars to check for abnormal noise, and
check the handlebars, front fork and absorbers for
deformation, bending cracks and other abnormal phenomena.
2.Check the hydraulic front fork and absorber for oil
leakage and other abnormal phenomena. If there is any
abnormality, please go to the distribution unit for
inspection and maintenance.
33 34
1.If the battery needs to be stored for an extended period ,
it should be kept at around 50% state of charge (or charge
the battery for 2~3hours after used up), and should be
placed in a dry and ventilated circumstance.
The battery should be charged 2~3 hours every two months.
2.The battery and charger should be kept in storage in a clean,
dry and ventilated circumstance, it should be avoided to
touch with the corrosive substance and should be away
from excessive heat and open flames.
3.Storage conditions for the battery: circumstance
temperature -20～35℃, circumstance relative humidity:
5～65％RH
4.The battery should be packed into the box for transport,
it should be protected from intense physical shock,
severe vibration, impact, direct rays, or waterlogging.
The vehicle can be automobile, train, shipping, airplane, etc.
5.The charger should be disconnected from the battery
when be kept in storage.
6.Storage conditions for the charger: circumstance t
emperature -20～55℃,ircumstance relative humidity:
5～65％RH
7.The charger should be packed into the box for transport,
it should be protected from intense physical shock,
severe vibration, impact, direct rays, or waterlogging.
The vehicle can be automobile, train, shipping, airplane, etc.
Storage，maintenance and transport
Preparation before inspection
Inspection of handlebar,
front fork and absorbers
To Next Page
Loading...
Need help?
General
