Need help?Do you have a question about the Yaesu FV-301 and is the answer not in the manual?
Describes the FV-301's versatile operation, benefits for contest operators, DX chasers, and Net Control Managers.
Details the 13.5V DC for the pilot lamp and 6V DC for VFO/crystal oscillator.
Explains how to connect the power cable and VFO output to the transceiver.
Explains the main tuning dial scales (white/amber) and sub-dial for frequency readout.
Details the procedure for calibrating the frequency using the CLARIFIER and CALIB knob.
Describes VFO mode and crystal-controlled operation using the SELECT switch.
Explains the VFO module, its signal generation, and frequency drift minimization.
Describes crystal-controlled operation, selector switch, and trimmer capacitors for frequency adjustment.
Lists necessary equipment like the FT-301 transceiver and VTVM for testing.
Details how to adjust the temperature compensating capacitor (TC801) for stability.
To Next Page
General
