STATUS
CODE
DISPLAY MESSAGE RECOVERY METHOD CIRCUIT
80244 Needs Perform routine service
maintenance
Display
Service
DESCRIPTION BEHAVIOR
The truck hours have hit a service reminder
interval, please perform routine service. - ( Dash
Node 16)
Vehicle operation limited until service cleared.
Probable Causes and Test Procedures
1. Verify truck operational, but traction speed limited to Mode 1:
YES- Proceed to step 2.
NO- See error codes for other service needs first.
2. Vehicle needs normal interval service, has this been performed?
YES- Using PC Service tool, reset the service interval under SETUP->Truck Settings -> Service
Reminder.
NO- Perform required service and repeat steps 1-2.
Refer to Operating
Manual for service reminders.
STATUS
CODE
DISPLAY MESSAGE RECOVERY METHOD CIRCUIT
80245 Service Re-key / Pass Checklist Display
Required
DESCRIPTION BEHAVIOR
Operator has indicated failure on the startup
checklist for truck - ( Dash Node 16)
Vehicle operation limited until service cleared.
Probable Causes and Test Procedures
1. Verify truck operational, but traction speed limited to mode 1.
YES- Proceed to Step 2.
NO- See error codes for other service needs first.
2. If "YES" is answered to all checklist inquiries does vehicle operate normally?
YES- Have truck serviced for operator reported checklist failure.
NO- Check error log for other suspect codes preventing normal operation.
Refer to Operating
Manual for checklists.
Troubleshooting 2200 YRM 1415
128