Actate learnn oe
(1)
All devices in the kit are pre-linked to the Smart Hub. If you want to add more
devices, you can do this by using the Add device section in the
Smart Living Home app.
200
Press button to test connection
1
2
3
o to the app menu and select
Add Device, then activate learning
mode.
Press the learn button on the device you want to add, the
Smart Hub will beep when the device is added. You will then see
the new device on your app screen.
Exit Learning mode after you have added all the additional devices.
set eratin ing ne eies
To Next Page
Loading...
