Yale SR-310

Other manuals for Yale SR-310

Questions and Answers:

D
David ByrdAug 17, 2025
Why is my Yale SR-310 siren not responding to arming or disarming?
- J
  Joseph ThomasAug 18, 2025
  If your Yale Security System siren isn't responding to arming or disarming, the batteries may be completely exhausted. Check your app for battery status. Alternatively, the siren may not be properly connected. If removing the siren cover triggers a tamper alarm, try reconnecting the siren. It's also possible that the siren is out of range of the Smart Hub; ensure they are within 30m of each other and relocate devices if needed.
A
Amy HarrisAug 20, 2025
What to do if my Yale SR-310 Security System PIR Motion Detector gives false alarms?
- J
  Jennifer AllenAug 20, 2025
  If your Yale Security System PIR Motion Detector is giving false alarms, check that pets do not have access to the protected area. Also, make sure the detector isn't pointed at heat sources or moving objects like curtains. Finally, ensure the detector isn't mounted above convector heaters or pointing directly at windows.
A
Andrew FreemanAug 22, 2025
Why is the LED flashing on my Yale SR-310 PIR Motion Detector?
- A
  adamsdanielleAug 23, 2025
  If the LED on your Yale Security System PIR Motion Detector is flashing, it could indicate low batteries or a disturbed tamper switch. Check your app for the device's battery status and replace them if necessary. Also, verify that the tamper switch spring is making contact with the base.
L
Linda HansonAug 25, 2025
Why is my Yale SR-310 Security System door or window contact LED lighting up?
- C
  Cheryl WilliamsAug 26, 2025
  If the LED on your Yale Security System door or window contact is lit, it could mean the batteries are low, or the tamper switch has been disturbed. Check that the tamper switch spring is making contact with the mounting surface. If the tamper switch is okay, replace the battery.
J
John ChaseAug 28, 2025
How to fix a Yale Security System door or window contact that does not respond?
- S
  Sharon MorganAug 28, 2025
  If your Yale Security System door or window contact isn't responding, the batteries might be completely exhausted; replace them. Another possible cause is that the magnet is too far from the sensor; ensure the gap between the magnet and sensor is no more than 10mm.
M
Michelle SantiagoAug 30, 2025
Why does my Yale Security System siren produce a series of audible pips when armed or disarmed?
- M
  Mark MurilloAug 30, 2025
  If your Yale Security System siren is producing audible pips when armed or disarmed, it could be due to low batteries. Check your app to confirm the battery status. Alternatively, it may indicate a tamper fault. Ensure the siren cover is firmly secured and the tamper spring on the back is fully depressed against the wall. If there's a gap, use packing material to fill it.
J
Joshua AustinSep 1, 2025
Why is my Yale Security System PIR Image Camera & PIR Video Camera LED flashing every 20 minutes?
- R
  rthompsonSep 1, 2025
  If the LED on your Yale Security System PIR Image Camera or PIR Video Camera flashes every 20 minutes, the device might be out of range of the Smart Hub. If a PIR Image Camera or PIR Video camera is not connected to the system or within range of the Smart Hub, battery life will be greatly affected while it searches for a connection.
W
wmartinSep 4, 2025
Why is my Yale Security System PIR Motion Detector not responding to movement?
- P
  patelgeraldSep 4, 2025
  If your Yale Security System PIR Motion Detector isn't responding to movement, the batteries may be completely exhausted. Check your app for the device's battery status and replace the batteries.
S
Shannon LopezSep 7, 2025
What to do if my Yale SR-310 Security System PIR does not respond to motion?
- T
  Teresa SmithSep 7, 2025
  To troubleshoot a Yale Security System PIR that doesn't respond to motion, arm the system and vacate the protected area for at least 60 seconds before testing. By pressing the learn/test button the PIR LED will light up and detect motion for the first minute.
S
sara79Sep 9, 2025
Why is my Yale SR-310 PIR Motion Detector slow to respond?
- H
  haleygreeneSep 9, 2025
  A Yale Security System PIR Motion Detector may be slow to respond because it's normal. The PIR Motion Detector has sophisticated false alarm filtering to filter out random fluctuations, and responds to genuine motion across field of view, the PIR is less sensitive, when walking directly towards it.