GT-222ES, SRM-222ES, F226S, T226S, C226S
10-21U-00
1
INTRODUCTION
We are constantly working on technical im-
provement of our products. For this reason,
technical data, equipment and design are
subject to change without notice. All speci-
fications and directions in this SERVICE
DATA are based on the latest product infor-
mation available at the time of publication.
1
SERVICE DATA
TRIMMER/BRUSHCUTTER
ECHO:
GT-222ES/SRM-222ES
shindaiwa:
F226S/T226S/C226S
STAGE MODEL
(Serial number : 37000001 and after)
CONTENTS
page
1 SERVICE INFORMATION
.............................. 2
1-1 Specifi cation ............................................... 2
1-2 Technical data ............................................. 3
1-3 Torque limits................................................ 4
1-4 Special repairing materials ......................... 4
1-5 Service limits............................................... 5
1-6 Special tools ............................................... 6
2
CARBURETOR ADJUSTMENT PROCEDURE
...
7
2-1 General adjusting rules ............................... 7
2-2 Presetting Idle adjust screw, Idle mixture
needle and Hi speed mixture needle ................. 7
2-3 Adjusting carburetor.................................... 8
Reference No.
10-21U-00
ISSUED: 201206
To Next Page
Need help?
General
