Why is sound distorted on my Yamaha 01V96i?
Sound distortion on your Yamaha Music Mixer can occur due to several reasons. Ensure the wordclock is correctly set. Check if the GAIN is at an appropriate level. Also, verify that the input and STEREO channel faders aren't raised excessively, and that the EQ or COMP gain isn't too high.
What to do if sound is not input on Yamaha 01V96i Music Mixer?
If sound is not being input into your Yamaha Music Mixer, consider the following: * Verify the optional I/O card is correctly inserted. * Confirm the signal from the external device is being input. * Check if the input port is patched to an input channel. * Ensure the GAIN is set to an appropriate level. * Verify the EQ attenuator is raised. * Check if an insert is turned on but not assigned correctly. * Confirm the input channel’s [ON] key indicator is lit. * Ensure the input channel’s fader is raised.
What to do if sound is not output on Yamaha Music Mixer?
If sound is not outputting from your Yamaha Music Mixer, check these points: * Ensure the optional I/O card is correctly inserted. * Verify the STEREO channel’s [ON] key indicator is lit. * Confirm the output channel is patched to an output port.
Why is volume insufficient on my Yamaha 01V96i?
If you're experiencing insufficient volume with your Yamaha Music Mixer, check these settings: Is the GAIN set to an appropriate level? Is the input channel’s fader raised? Could the EQ gain be lowered excessively? Could the GATE/COMP threshold or ratio be set to an excessive value? Is the EQ attenuator raised? Is the output channel’s fader raised? Also, check the levels in each screen of the METER function.
What to do if sound is output even though not patched to an output channel on Yamaha Music Mixer?
If sound is outputting even when not patched to an output channel on your Yamaha Music Mixer, it might be because the input channel is set to direct out, or insert out is assigned to the output channel.
What to do if sound is not output from headphones or MONITOR OUT jacks on Yamaha 01V96i Music Mixer?
If you're not getting sound from the headphones or MONITOR OUT jacks on your Yamaha Music Mixer, check if the [PHONES] knob or [LEVEL] knob is set to an appropriate volume.
How to transmit or receive MIDI data on Yamaha 01V96i?
To transmit or receive MIDI data on your Yamaha Music Mixer, ensure the MIDI PORT is selected correctly. Also, verify that the MODE and channel are selected correctly on both the transmitting and receiving devices. Finally, check if you have assigned an event to the program change.
What to do if power won’t turn on, panel LEDs or LCD won’t light on Yamaha 01V96i Music Mixer?
If the power still does not turn on, contact a Yamaha service center listed at the end of the manual.
What to do if when a scene is recalled, some channels or parameters do not update on Yamaha Music Mixer?
If some channels or parameters don't update when a scene is recalled on your Yamaha Music Mixer, recall safe may be specified for those channels or parameters.
Why when a scene is recalled, it takes time for the faders to stop on Yamaha 01V96i Music Mixer?
If it takes time for the faders to stop when a scene is recalled on your Yamaha Music Mixer, a fade time might have been specified.
General| Sample rate | 96 kHz |
|---|---|
| Channels quantity | 36 channels |
| Power consumption (typical) | 90 W |
| DJ mixer | No |
| USB port | Yes |
| Apple docking compatibility | Not supported |
| USB 2.0 ports quantity | 1 |
Weight and Dimensions| Depth | 548 mm |
|---|---|
| Width | 436 mm |
| Height | 148 mm |
| Weight | 14000 g |
To Next Page
