Need help?Do you have a question about the Yamaha 1968 YAS1-C and is the answer not in the manual?
General| Year | 1968 |
|---|---|
| Manufacturer | Yamaha |
| Model | YAS1-C |
| Category | Motorcycle |
| Fuel System | Carburetor |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Front Brake | Drum |
| Rear Brake | Drum |
| Rear Suspension | Swingarm with shock absorbers |
Guidance on performing service tasks and safety precautions.
Important safety rules to follow during motorcycle operation and maintenance.
Explanation of the operating principles of two-stroke engines.
Steps and tables for diagnosing and resolving engine issues.
Methods for troubleshooting fuel system problems.
Procedures for carburetor adjustment and maintenance.
How to adjust idle mixture and idle speed for optimal performance.
Functionality and components of the ignition system.
Diagnosing and resolving ignition system malfunctions.
Introduction to the motorcycle charging systems.
Information on DC generators used in the motorcycles.
Diagnosing and resolving issues with DC generators.
Troubleshooting steps for DC generators.
Diagnosing and resolving starter/generator malfunctions.
Steps for removing and installing the clutch assembly.
How to inspect crankshafts for wear and runout.
Overview of transmission types and models.
Procedures for disassembling and assembling the master cylinder.
Procedure for bleeding the hydraulic brake system.
Procedures for replacing steering head bearings and races.
Recommended maintenance schedule based on mileage.
Specifications for HS1 and HS1-B models.
Specifications for YLI and YLI-E models.
Specifications for the AS2C model.
Specifications for the YAS1 model.
Specifications for the YAS1-C model.
Specifications for YCS-1 and YCS1-C models.
Specifications for CS3-B and CS3-C models.
Specifications for the CS5 model.
Specifications for DS6 and DS6-B models.
Specifications for the DS6-C model.
Specifications for the DS7 model.
Specifications for RD250 and RD250A models.
Specifications for YDS3, YDS3-C, and YM1 models.
Specifications for the YDS5 model.
Specifications for the YM2 model.
Specifications for the YM2-C model.
Specifications for the R3 model.
Specifications for the R3-C model.
Specifications for the R5 model.
Specifications for the R5-B model.
Specifications for the R5-C model.
Specifications for RD350 and RD350A models.
Specifications for YR1, YR2, and YR2-C models.
Table of recommended torque values for various bolt sizes and thread types.
To Next Page