Need help?Do you have a question about the Yamaha 1969 FS1 and is the answer not in the manual?
General| Brand | Yamaha |
|---|---|
| Model | 1969 FS1 |
| Category | Motorcycle |
| Language | English |
Structure and removal of the front wheel assembly.
Construction view and removal of the rear wheel.
Checking the front fork for bend and oil leakage.
Procedure for disassembling the front fork.
Checking inner tube and oil seals of the front fork.
Procedure for reassembling the front fork.
Function and service of the ignition system.
Function and checking of charging and lighting systems.
Service standards for ignition timing, point gap, and coils.
Function and checking of charging and lighting systems.
Procedure for checking the main switch.
Battery checking, service life, and storage.
Spark plug inspection and condition reading.
Tools and instruments required for service.
Procedures for checking and adjusting the oil pump.
Step-by-step procedure for removing the engine from the chassis.
Removal and reinstallation of the cylinder head.
Checking cylinder wear and minimum clearance.
Procedures for driving out and fitting the piston pin.
Removing, fitting, and checking piston rings.
Checking and reconditioning the piston.
Description of the wet, multi-disc clutch assembly.
Procedures for adjusting clutch cable tension.
Mechanism and removal of the kickstarter.
Construction, operation, and removal of the shifting mechanism.
Removal and checking of the rotary valve.
Procedure for splitting the crankcase halves.
Exploded view and gear ratios of the transmission.
Dimensions, removal, and checking of the crankshaft.
Removal and reinstallation of bearings and oil seals.
Checking and reconditioning the carburetor.
Checking the condenser's insulation resistance and capacity.
Crankshaft assembly service data, including axial play and runout.
Spark plug, gap, timing, and point gap specifications.
To Next Page