Need help?Do you have a question about the Yamaha 2006 Virago XV250V and is the answer not in the manual?
General| Displacement | 249 cc |
|---|---|
| Compression Ratio | 10.0:1 |
| Fuel System | Mikuni BDS26 x 1 |
| Ignition | CDI |
| Starting System | Electric |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Front Brake | Single disc |
| Rear Brake | Drum |
| Front Tire | 3.00-18 |
| Rear Tire | 130/90-15 |
| Weight (wet) | 148 kg |
| Fuel Capacity | 9.5 liters |
| Engine Type | Air-cooled, SOHC, 60° V-twin |
| Bore x Stroke | 49.0 x 66.0mm |
| Rear Suspension | Dual shocks |
| Seat Height | 685 mm |
| Wheelbase | 1, 490 mm |
| Dry Weight | 137 kg |
Explains manual notations (Warning, Caution, Note) and provides a critical pre-operation warning.
Outlines operator duties, safe riding practices, and skill requirements for safe motorcycle operation.
Details essential protective clothing and gear to minimize injury from accidents, especially head injuries.
Provides guidelines for loading cargo and installing accessories to maintain vehicle stability and safe handling.
Outlines safety precautions related to handling flammable gasoline and poisonous exhaust fumes.
Illustrates and directs users to important safety and information labels on the motorcycle.
Identifies and labels key components visible from the left side of the motorcycle.
Identifies and labels key components visible from the right side of the motorcycle.
Provides a diagram and list of the motorcycle's controls and instrument panel elements.
Explains the function and positions of the main electrical switch.
Describes the purpose and function of each indicator light on the instrument panel.
Details the speedometer, odometer, and tripmeter functions.
Explains the operation of switches located on both left and right handlebars.
Explains how to use the clutch lever for engaging and disengaging the clutch.
Describes the operation of the shift pedal and the front/rear brake levers/pedals.
Details the procedure for opening and closing the fuel tank cap securely.
Instructs on how to check the fuel level and proper filling procedures.
Explains the different positions of the fuel cock lever and their functions.
Describes how to operate the starter (choke) lever for cold engine starting.
Details the steps for locking and unlocking the steering mechanism.
Explains how to remove and reinstall the rider seat.
Describes how to use the helmet holder, including a safety warning.
Guides on adjusting the spring preload on shock absorber assemblies.
Explains the sidestand's function and critical safety warnings regarding its use.
Details the functions of the ignition circuit cut-off system involving sidestand, clutch, and neutral switches.
Emphasizes the owner's responsibility and the importance of checks before each ride for safety.
Details checks for fuel level, line, and engine oil level and condition.
Covers checks for front and rear brake operation, fluid, pads/shoes, and levers.
Outlines checks for clutch operation, free play, and throttle grip smoothness and free play.
Covers checks for drive chain slack and condition, and tire condition, tread, and pressure.
Details checks for brake/shift pedals, levers, sidestand, and chassis fasteners for smooth operation.
Covers checks for instruments, lights, signals, switches, and battery condition.
Provides a step-by-step guide for starting and warming up a cold engine safely.
Outlines the procedure for starting a warm engine, noting differences from cold starts.
Explains how to shift gears for optimal control during acceleration and climbing.
Offers advice on riding style to improve fuel efficiency.
Details the critical break-in period for new engines to ensure longevity and performance.
Provides instructions for parking the motorcycle safely, considering hot components and stability.
Introduces the owner's tool kit and the importance of periodic maintenance for vehicle safety and efficiency.
Presents a schedule for regular checks and maintenance tasks based on mileage and time.
Covers checks and replacement for brake hoses, pads, and shoes.
Details checks for wheels, tires, and wheel bearings for safe operation.
Covers maintenance for the drive chain, steering bearings, chassis fasteners, and sidestand.
Outlines maintenance for rear suspension points, carburetor, and engine oil/filter.
Details checks and lubrication for brake switches, moving parts, cables, and throttle grip.
Covers checking and adjusting lights, signals, and switches.
Explains how to remove a panel and check the spark plugs for engine condition.
Provides spark plug specifications, gap adjustment, and installation procedures.
Guides on checking, changing engine oil, and replacing the oil filter element.
Details the procedure for cleaning the air filter element, especially in dusty conditions.
Advises leaving carburetor adjustments to dealers due to complexity and potential damage.
Explains how to check and adjust the engine's idling speed.
Instructs on checking and adjusting the free play in the throttle cable.
Mentions valve clearance adjustments by dealer and general tire information.
Details checking tire air pressure and inspecting tires for wear and damage.
Covers inspection of spoke wheels for damage, bends, and spoke tension.
Guides on how to adjust the free play of the clutch lever.
Explains the procedure for adjusting the free play of the front brake lever.
Details how to adjust the brake pedal position and its free play.
Specifies checking and adjusting the brake pedal free play.
Guides on adjusting the rear brake light switch timing.
Describes how to check front brake pads and rear brake shoes for wear.
Instructs on checking the front brake fluid level and precautions.
Advises on changing brake fluid and replacing seals/hoses at specified intervals.
Details how to check and adjust the drive chain slack.
Explains the process for cleaning and lubricating the drive chain to prevent wear.
Guides on checking and lubricating control cables for smooth operation.
Details checking and lubricating the throttle grip and cable.
Covers checking and lubricating the brake and shift pedals.
Covers checking and lubricating the brake and clutch levers.
Explains how to check and lubricate the sidestand pivot and contact surfaces.
Details lubricating the swingarm pivots at specified intervals.
Guides on checking the front fork's condition and smooth operation.
Describes how to check the steering for worn or loose bearings.
Explains how to check front and rear wheel bearings for play or smooth turning.
Guides on checking the battery electrolyte level and adding distilled water.
Details how to replace blown fuses with the correct amperage.
Provides steps for replacing the headlight bulb, including safety warnings.
Explains how to replace the tail/brake light bulb.
Details the process for replacing a turn signal light bulb.
Provides precautions for supporting the motorcycle when removing wheels or performing maintenance.
Guides on removing and reinstalling the front wheel.
Details the initial steps for removing the rear wheel.
Details the steps for reinstalling the rear wheel, including chain and brake rod connections.
Introduces troubleshooting for common engine and system issues and recommends genuine parts.
Provides a flow chart for diagnosing starting problems related to fuel, compression, ignition, and battery.
Outlines general cleaning steps, precautions for different materials, and avoiding high-pressure washers.
Provides instructions for both short-term and long-term storage, including fuel and battery care.
Lists the physical dimensions and weight specifications of the motorcycle.
Details engine type, displacement, bore, stroke, compression, and oil type/quantity.
Lists carburetor manufacturer and spark plug model and gap specifications.
Provides details on frame type, caster angle, trail, and tire specifications.
Lists specifications for front/rear brakes, front/rear suspension, and wheel types.
Details ignition system, charging system, battery model, and voltage.
Lists bulb types, voltage, wattage, and quantity for various lights.
Lists the amperage ratings for the main and signaling system fuses.
Explains how to locate and record key and vehicle identification numbers for parts ordering and registration.
Guides on locating and recording information from the model label for spare parts.
Warns against tampering with noise control systems as per Australian law.
To Next Page
