To Next Page
V
Victor MeyerSep 6, 2025
How to setup Yamaha 25NMH tachometer to show the oil pressure?
- JJimmy AndersonSep 6, 2025
Select the oil press. display.
How to setup Yamaha 25NMH tachometer to show the oil pressure?
Select the oil press. display.
What to do if the Yamaha 25NMH gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Why Yamaha 25NMH Outboard Motor illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
How to fix Yamaha 25NMH tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
What causes Yamaha 25NMH Outboard Motor fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
What to do if Yamaha 25NMH gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
What to do if my Yamaha Outboard Motor speedometer shows the incorrect fuel level?
If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
What does it mean when my Yamaha 25NMH gauge shows “----”?
If the gauge shows “----”, it indicates that the digital signal is not being received. Make sure the couplers are securely connected and replace any damaged bus wires or hubs.
Why Yamaha 25NMH boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
What causes Yamaha Outboard Motor gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
General| Engine Type | 2-Stroke |
|---|---|
| Starting System | Manual |
| Fuel Induction System | Carburetor |
| Ignition System | CDI |
| Max Output | 25 hp |
| Maximum Output | 25 hp |
| Gear Ratio | 2.08:1 |
Guidelines for correctly positioning and mounting the outboard motor onto the boat transom.
Details on propeller types, materials, and design features for optimal performance.
Guidance on choosing the correct propeller based on engine, boat, and operating conditions.
Overview of available throttle control systems like "Push To Open" and "Pull To Open" models.
Description of features and electrical functions built into the multi-function tiller handle.
Details on analog tachometer applications, part numbers, and applicable models.
Information on speedometer types and applications, including digital and analog versions.
Overview of fuel management gauge functions like fuel flow, consumption, and economy.
Lists models compatible with digital network gauges, including 4-stroke and HPDI engines.
A table detailing common gauge issues, their causes, measures, and notes for resolution.
Information on selecting suitable batteries based on engine model, capacity, and charging voltage.
