Yamaha 2B - INDEX

GB
6-1
EMP10010
INDEX
A
Adjusting idling speed ..........................4-14
Adjusting trim angle..............................3-20
Air vent screw...........................................2-4
B
Breaking in engine (running in)..............3-8
C
Changing gear oil...................................4-23
Checking bolts and nuts........................4-25
Checking fuel system ............................4-12
Checking painted surface of motor......4-26
Checking propeller; shear pin and
cotter pin.................................................4-20
Checking wiring and connectors..........4-16
Choke knob........................................2-7, 2-8
Clamping the outboard motor................3-4
Cleaning and adjusting spark plug ......4-10
Cleaning fuel tank ..................................4-24
Cleaning the outboard motor...............4-26
Coating the boat bottom.......................4-26
Cruising in other conditions .................3-27
Cruising in salt water.............................3-27
Cruising in shallow water .....................3-22
Cruising in turbid water ........................3-27
E
Engine oil ..................................................1-5
Engine stop lanyard switch.....................2-6
Engine stop button ..................................2-5
Exhaust leakage .....................................4-16
F
Filling Fuel ................................................3-5
Filling fuel and engine oil........................3-5
Flushing cooling system .........................4-8
Fuel cock ...................................................2-9
Fuel hose joint..........................................2-4
Fuel meter.................................................2-4
Fuel tank....................................................2-4
Fuel tank cap.............................................2-4
Fueling instructions .................................1-4
G
Gasoline (petrol) ......................................1-5
Gasoline (petrol) and oil mixing.............3-5
Gear shift lever.........................................2-5
Greasing..................................................4-17
I
Identification numbers record ................1-1
Impact damage ........................................5-5
Inspecting and replacing anodes .........4-25
Inspecting and replacing fuel filter ......4-13
Installation ................................................3-1
K
Key number ..............................................1-1
M
Main components....................................2-1
Maintenance chart ...................................4-9
Motor exterior ........................................4-26
Mounting height ......................................3-3
Mounting the outboard motor ...............3-2
O
Operations of controls and other
functions ...................................................2-4
Outboard motor serial number ..............1-1
P
Periodic maintenance..............................4-8
Pre-operation check.................................3-7
Propeller selection ...................................1-5
R
Recoil starter handle................................2-8
Replacement parts...................................4-8
S
Safety information...................................1-2
Shifting....................................................3-16
Specifications ...........................................4-1
Start-in-gear protection...........................1-6
Starter will not operate............................5-6
Starting engine.......................................3-10
Steering friction adjustment.................2-11
Stopping engine.....................................3-18
Storing outboard motor..........................4-6
6A1-9-7LA0-6 3/7/02 12:20 PM Page 190