What to do if Yamaha 40VE Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha 40VE boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
General| Engine Type | 2-Stroke |
|---|---|
| Max Output | 40 hp |
| Fuel Induction System | Carburetor |
| Full Throttle RPM Range | 4500-5500 rpm |
| Starting System | Electric |
| Gear Ratio | 2.00:1 |
Details the steps for uncrating the outboard motor from a steel frame.
Instructions for mounting the outboard motor onto the boat transom.
Guidance on installing the remote oil tank for specific engines.
Details the specifications and types of Yamaha propellers.
Guidance on choosing the correct propeller for optimal performance.
Lists propeller applications for 2009 Yamaha outboard models.
Details applications for various Yamaha remote control models.
Covers applications for combination and independent switch panels.
Information on selecting, applying, and routing remote control cables.
Details the features and applications of the 6x4 Multi-Function Tiller Handle.
Lists components for the US market Multi-Function Tiller Handle Kit.
Information on analog tachometers, applications, and dimensions.
Details digital tachometers, applications, dimensions, and setup.
Information on speedometers, applications, dimensions, and setup.
Covers fuel management gauge applications, dimensions, setup, and wiring.
Provides wiring diagrams for various engine types and configurations.
Lists common troubleshooting steps for gauge system issues.
Details battery wiring procedures, including single, twin, and isolator systems.
Checklist for pre-delivery inspection of outboard motors.
To Next Page
