Need help?Do you have a question about the Yamaha 60 and is the answer not in the manual?
General| Starting System | Electric |
|---|---|
| Prop Shaft Horsepower | 60 hp |
| Gear Ratio | 2.00:1 |
| Steering | Remote |
| Shaft Length | 20 in |
Explains the use of symbols, warnings, cautions, and notes to convey important information.
Details how to find and record outboard motor serial and key numbers for identification.
Provides information on emission control compliance and labels for North American models.
Locates and describes the manufactured date label on the outboard motor.
Presents crucial safety precautions for operating the outboard motor and boat.
Outlines fundamental navigation rules and right-of-way principles for water safety.
Identifies and illustrates the main external components of the outboard motor.
Describes the function and location of fuel system parts like the joint, gauge, and cap.
Explains the operation of the remote control lever for shifting and throttle.
Details the tiller handle for steering and the gear shift lever operation.
Describes the throttle grip, friction adjuster, and throttle indicator functions.
Explains the function of the engine stop lanyard switch and engine stop button.
Details the operation of the main switch and power trim/tilt switches on remote or tiller.
Describes the trim/tilt switch on the cowling and the function of the trim tab with anode.
Explains the trim rod's function and how to operate top cowling lock levers.
Details the tilt support lever used to hold the outboard motor in a tilted position.
Explains the analog and digital tachometers and the oil level indicator gauges.
Describes overheat warning indicators, trim meters, and hour meters.
Explains how the warning system activates for overheat and other conditions.
Guides on proper installation and mounting height for optimal performance and safety.
Outlines engine break-in procedures and fuel mixing requirements.
Details essential checks before operation and procedures for post-storage engine use.
Provides instructions for fueling portable tanks and filling engine oil.
Provides step-by-step instructions for starting the engine using electric or remote controls.
Explains how to warm up the engine and shift gears safely.
Explains how to adjust trim angle for optimal boat performance and stability.
Guides on tilting the motor for shallow water operation and safe cruising techniques.
Lists technical specifications and provides a maintenance schedule for regular service.
Details flushing procedures and lubrication points for the outboard motor.
Details how to clean, adjust, and install spark plugs correctly.
Explains how to inspect fuel lines and clean the fuel filter.
Covers inspection of idling speed and checking the engine oil tank for water.
Guides on checking wiring, connectors, exhaust/water leaks, and the power trim system.
Details how to remove and install the propeller, including checking for damage.
Explains how to change gear oil and clean the fuel tank carefully.
Guides on inspecting anodes and providing proper care for the battery.
Details how to connect and disconnect the battery and check the top cowling fit.
Helps diagnose and resolve common problems related to engine starting.
Addresses issues like engine power loss, stalls, and warning indicator lights.
Provides instructions for starting the engine using an emergency starter rope.
Details procedures for ignition system malfunctions and starting a cold engine.
Provides steps to minimize engine damage if the outboard motor is submerged.
Outlines warranty coverage and registration procedures for Yamaha outboard motors in the US and Canada.
Details the terms and conditions of the limited warranty for Yamaha outboard motors.
Addresses common questions regarding warranty coverage, responsibilities, and dealer services.
Provides contact information for customer service and instructions for updating owner addresses.
Explains warranty applicability and service procedures for use outside the USA or Canada.
To Next Page
