Yamaha 60A - User Manual

Questions and Answers

F
Felicia SmithAug 15, 2025
Why Yamaha Outboard Motor starter will not operate?
- S
  shanejonesAug 15, 2025
  If your Yamaha Outboard Motor's starter won't operate, several factors could be at play. The battery capacity might be weak or low, requiring you to check its condition and potentially use a battery with the recommended capacity. The battery connections could be loose or corroded; ensure you tighten the battery cables and clean the terminals. A blown fuse in the electric start circuit could also be the culprit, so check for any electric overload, repair it, and replace the fuse with one of the correct amperage. Other potential causes include faulty starter components (have these serviced by a Yamaha dealer), the engine stop switch lanyard not being attached (attach the lanyard), or the shift lever being in gear (shift to neutral).
J
John JimenezAug 21, 2025
What to do if Yamaha 60A engine will not start but starter operates?
- M
  Michael WebsterAug 21, 2025
  If your Yamaha Outboard Motor engine won't start but the starter operates, here's what to check: The fuel tank may be empty, so fill it with clean, fresh fuel. The fuel could be contaminated or stale, requiring you to replace it with clean, fresh fuel. A clogged fuel filter needs cleaning or replacement. Make sure you are using the correct starting procedure. Inspect, clean, or replace fouled or incorrect spark plugs with the recommended type. Ensure spark plug caps are correctly fitted. Check for wear or breaks in the ignition wires, tighten loose connections, and replace worn or broken wires. Also, attach the engine stop switch lanyard and shift to neutral. For fuel pump malfunctions, faulty ignition parts, damaged engine inner parts, have it serviced by a Yamaha dealer.
J
Joanna WillisAug 26, 2025
How to troubleshoot a Yamaha 60A Outboard Motor when the starter will not operate?
- A
  Adam VaughanAug 26, 2025
  If the starter on your Yamaha Outboard Motor won't operate, begin by checking the battery. Ensure it's in good condition and has the recommended capacity. Tighten any loose battery cables and clean corroded terminals. Inspect the fuse for the electric start circuit and replace it if blown, after addressing the cause of the overload. Ensure the engine stop switch lanyard is attached and the shift lever is in neutral.
A
annadelgadoSep 12, 2025
How to fix excessive vibration in Yamaha Outboard Motor?
- J
  John MaldonadoSep 12, 2025
  Excessive vibration in your Yamaha Outboard Motor can stem from several issues. A damaged propeller should be repaired or replaced. A damaged propeller shaft or steering pivot requires servicing by a Yamaha dealer. Remove any weeds or foreign matter tangled on the propeller. Check for and tighten any loose motor mounting bolts. Also, tighten or have serviced a loose or damaged steering pivot by a Yamaha dealer.
C
Catherine RiosNov 17, 2025
Why does the warning buzzer sound on my Yamaha 60A Outboard Motor?
- P
  Phyllis CampbellNov 18, 2025
  If the warning buzzer sounds or the indicator lamp lights on your Yamaha Outboard Motor, it could be due to several reasons. The cooling system might be clogged, so check the water intake for any restrictions. The engine oil level could be low, requiring you to fill the oil tank with the specified engine oil. An incorrect heat range of the spark plug necessitates inspecting and replacing it with the recommended type. Ensure you are using the specified engine oil and replace it if it's contaminated or deteriorated. If the oil filter is clogged or the oil feed/injection pump malfunctions, have it serviced by a Yamaha dealer. Improper load distribution on the boat can also trigger the warning, so distribute the load evenly. Lastly, a faulty water pump or thermostat should be serviced by a Yam...
P
Parker TravisNov 27, 2025
What to do if my Yamaha 60A engine will not start but the starter operates?
- W
  Wayne Holland MDNov 28, 2025
  If the Yamaha Outboard Motor's starter operates but the engine doesn't start, several factors could be at play. Ensure the fuel tank isn't empty and that you're using clean, fresh fuel. A clogged fuel filter could also be the culprit, so clean or replace it. Check the spark plugs for fouling or incorrect type, and inspect the spark plug caps for proper fitting. Also, make sure the engine stop switch lanyard is attached and the shift lever is in neutral. Poor connections or damaged ignition wiring can also prevent starting, so inspect for wear or breaks and tighten any loose connections. If the starting procedure is incorrect, consult the 'STARTING ENGINE' section. For fuel pump malfunctions, faulty ignition parts, or damaged engine inner parts, it is best to have your Yamaha dealer service...
C
Christopher SmithDec 1, 2025
Why does my Yamaha Outboard Motor engine idle irregularly or stall?

Yamaha 60A Specifications

General

Horsepower	60 hp
Cylinders	4
Full Throttle Operating Range	5000 - 6000 rpm
Fuel Induction System	EFI (Electronic Fuel Injection)
Starting System	Electric
Steering	Remote
Engine Type	4-stroke
Displacement	996 cc
Shaft Length Options	L, X
Trim System	Power Trim & Tilt
Exhaust	Through Prop