Yamaha 60FET - User Manual

Questions and Answers

J
joywebbSep 23, 2025
Why doesn't my Yamaha 60FET boat speed gauge show?
- J
  Jose CoffeySep 23, 2025
  If the boat speed and/or coolant pressure gauge isn't showing, it means the optional sensor hasn't been installed. Install the optional sensor to fix this.
L
lwilliamsAug 25, 2025
What to do if the Yamaha 60FET Outboard Motor gauge display does not wake up?
- M
  Michelle MyersAug 25, 2025
  If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
J
juliewilsonAug 25, 2025
Why Yamaha Outboard Motor illumination does not light?
- A
  Andres MeyerAug 26, 2025
  If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
M
Matthew JonesAug 27, 2025
How to fix Yamaha Outboard Motor tachometer showing incorrect engine RPM?
- B
  Breanna SextonAug 27, 2025
  If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
T
thompsonkendraAug 27, 2025
What causes Yamaha Outboard Motor fuel management gauge to show incorrect remaining fuel?
- N
  nknightAug 27, 2025
  If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
R
rebeccamorseSep 14, 2025
Why does my Yamaha Outboard Motor fuel management gauge show incorrect remaining fuel?
- L
  Linda SmithSep 14, 2025
  If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting is probably wrong. Fill the tank with fuel, and then set the correct fuel tank capacity.
K
Kaylee FarmerSep 12, 2025
What to do if my Yamaha Outboard Motor speedometer shows the incorrect fuel level?
- R
  Rebecca NicholsSep 12, 2025
  If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
S
Sandra HarrisSep 13, 2025
What does it mean when my Yamaha 60FET Outboard Motor gauge shows “----”?
- R
  Richard PetersonSep 13, 2025
  If the gauge shows “----”, it indicates that the digital signal is not being received. Make sure the couplers are securely connected and replace any damaged bus wires or hubs.
K
kim25Sep 4, 2025
Why Yamaha 60FET boat speed and/or coolant pressure gauge does not show?
- O
  oharrisSep 4, 2025
  If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
H
Heidi GarzaSep 2, 2025
What causes Yamaha Outboard Motor gauge response to be poor or down?
- P
  Paul BakerSep 2, 2025
  If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.