Need help?Do you have a question about the Yamaha 6X9 DIGITAL ELECTRONIC CONTROL and is the answer not in the manual?
General| Category | Outboard Motor |
|---|---|
| Engine Type | 2-Stroke |
| Displacement | 849 cc |
| Full Throttle RPM Range | 4500 - 5500 rpm |
| Fuel Delivery System | Carburetor |
| Ignition System | CDI |
| Starting System | Electric |
| Model | 6X9 |
Details red alert notifications and their meanings, such as position or course loss.
Explains yellow notifications, like Battery Charge Low or GPS instability.
Provides a list of abbreviations used throughout the manual for clarity.
Advises users to read all labels and related manuals before operating the system.
Explains the components and basic functions of the Electronic Key Switch system.
Details how to use the POWER switch to turn engines on and off.
Describes how to start and stop individual engines using the START/STOP switch.
Explains the function and safety requirements of the engine shut-off switch.
Covers password card, changing password, adding key fob, and battery replacement procedures.
Explains the function and meaning of the DEC alert indicator on the control box.
Details how to use the remote control levers for forward, reverse, and throttle control.
Provides instructions on how to adjust the friction of the remote control levers.
Explains how to adjust the detent or click feel when shifting the remote control levers.
Describes the operation of the neutral hold switch for throttle control.
Explains how to use the single lever switch for simultaneous shift and throttle operations.
Details the operation of the center engine switch for controlling center engines.
Explains how to use the speed control switch to maintain or adjust boat speed.
Describes how to switch between main and second stations for dual station operation.
Explains how to adjust outboard motor trim and tilt angles using the PTT switch.
Guides on setting up and configuring the Trim Assist system for automatic trim control.
Introduces the Autopilot system, its modes, panel layout, and sensitivity adjustments.
Provides instructions for calibrating the heading sensor for accurate Autopilot performance.
Explains the basic functions and controls of the Joystick system.
Illustrates various boat maneuvers that can be performed using the joystick.
Details the operation of the joystick switch and the procedure for joystick calibration.
Details the autopilot panel layout and describes core modes like Heading Hold, Course Hold, Track Point, and Pattern Steer.
Explains how to adjust the Autopilot's steering sensitivity level.
Explains how to use and adjust the Heading Hold Autopilot mode.
Describes how to use and adjust the Course Hold Autopilot mode.
Details the operation of the Track Point Autopilot mode for following a route.
Explains how to use the Pattern Steer Autopilot mode for steering along predefined patterns.
To Next Page
