Why doesn't my Yamaha 8CMH boat speed gauge show?
If the boat speed and/or coolant pressure gauge isn't showing, it means the optional sensor hasn't been installed. Install the optional sensor to fix this.
What to do if the Yamaha 8CMH gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Why Yamaha Outboard Motor illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
How to fix Yamaha 8CMH Outboard Motor tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
What causes Yamaha 8CMH fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
Why does my Yamaha 8CMH Outboard Motor fuel management gauge show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting is probably wrong. Fill the tank with fuel, and then set the correct fuel tank capacity.
What to do if my Yamaha Outboard Motor speedometer shows the incorrect fuel level?
If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
What does it mean when my Yamaha Outboard Motor gauge shows “----”?
If the gauge shows “----”, it indicates that the digital signal is not being received. Make sure the couplers are securely connected and replace any damaged bus wires or hubs.
Why Yamaha 8CMH boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
What causes Yamaha 8CMH Outboard Motor gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
Step-by-step guide for safely removing the outboard motor from its steel crate.
Details on the correct positioning and mounting of the outboard motor on a boat transom.
Overview of Yamaha propeller types, their design, and features for optimal performance.
Describes available throttle control systems (Push To Open/Pull To Open) and connector types.
Details the features and electrical functions of the multi-function tiller handle.
Procedures for installing gauges, including selecting mounting locations and connecting wiring.
Functions, types, applications, dimensions, and setup procedures for the fuel management gauge.
Common issues and solutions for system or gauge malfunctions, setup errors, or incorrect operations.
Wiring diagrams for dual station applications with 6Y9 gauges and various engine configurations.
Guidelines for selecting the correct battery capacity and CCA rating for engine performance.
Instructions for wiring batteries, including isolator-equipped models and twin-engine applications.
General| Engine Type | 2-Stroke |
|---|---|
| Max. Output | 5.9 kW (8 hp) |
| Fuel Induction System | Carburetor |
| Ignition System | CDI |
| Starting System | Manual |
| Gear Ratio | 2.08 (27/13) |
| Gear Shift | F-N-R |
| Fuel Tank Capacity | 12 L (3.2 US gal) |
| Lubrication System | Premix (oil mixed with fuel) |
To Next Page
