Yamaha AES620HB - User Manual

AES620HB
SERVICE MANUAL
ELECTRIC GUITAR
CONTENTS
OVERALL ASSEMBLY .................................................... 2
CIRCUIT DIAGRAM......................................................... 4
SPECIFICATIONS ............................................................ 4
WIRING............................................................................ 4
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD.
In addition, other electrical/electronic and/or plastic (Where appli-
cable) components may also contain traces of chemicals found
by the California Health and Welfare Agency (and possibly other
entities) to cause cancer and/or birth defects or other reproduc-
tive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR
PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your
skin! When soldering, do not inhale solder fumes or expose eyes
BLD OVS
EG
011787
HAMAMATSU, JAPAN
Copyright (c) Yamaha Corporation. All rights reserved. PDF-K297 ’05.08

Summary

Health and Environmental Precautions

Overall Assembly

Jack Installation

Details the installation process for the guitar jack.

Circuit Diagram

Specifications

Lists key technical details of the electric guitar model.

Wiring Diagram

Yamaha AES620HB Specifications

General

Body Type	Solidbody
Body Material	Mahogany
Neck Material	Mahogany
Fingerboard Material	Rosewood
Number of Frets	22
Scale Length	24.75 inches
Pickup Configuration	HH
Bridge	Tune-o-matic
Hardware	Chrome
Color	Honey Burst
Neck	Set-Neck
Controls	2 Volume, 2 Tone, 3-Way Toggle Switch