Yamaha AR195 User Manual

Name: Yamaha AR195
Brand: Yamaha
Rating: 5 (1 reviews)

144 pages

To Next Page

To Previous Page

Pre-operation checks

Drain plug check

Loosen the drain plugs and remove them, and

then make sure that the plugs and the O-rings

on the hull drain plugs are not damaged and

that there is no foreign material on the threads

or the O-rings on the hull drain plugs.

NOTICE: Before installing the drain plugs,

clean the drain plug threads and the

O-rings on the hull drain plugs to remove

any foreign materials, such as dirt or sand.

Otherwise, the drain plugs could be dam-

aged, allowing water to enter the engine

compartment or the fuel tank compart-

ment. Make sure that the drain plugs are

tightened securely before launching the

boat. Otherwise, water may flood the boat

and cause it to submerge.

Securely install the drain plugs by tightening

them until they stop.

1 Hull drain plug

1 Engine compartment drain plug

1 Fuel tank compartment drain plug

1 1

SportsBoat_F4B10.book Page 89 Thursday, June 2, 2016 10:08 AM

Downloaded from ManualsNet.com search engine

Questions and Answers:

General