Need help?Do you have a question about the Yamaha AVANTAGE RX-A2A and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| High Slew Rate Amplifier | Yes |
| HDMI Inputs | 7 |
| HDMI Version | 2.1 |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Wi-Fi | Yes (2.4/5 GHz) |
| Bluetooth | Yes (SBC/AAC) |
| AirPlay 2 | Yes |
| Zone 2 | Yes |
| Zone 2 Audio Output | Pre-out |
| HDMI eARC | Yes |
| Dolby Vision Support | Yes |
| Phono Input | Yes |
| Power Output | 100 W per channel (8 ohms, 20Hz-20kHz, 0.06% THD) |
| HDMI Outputs | 1 |
| HDR Support | HDR10+, HDR10, HLG |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.06% (20Hz-20kHz, 50W, 8 ohms) |
| Inputs | HDMI, Optical, Coaxial, Phono, Analog, USB |
| Outputs | HDMI, Subwoofer, Headphone |
| Supported Audio Formats | MP3, WMA, MPEG-4 AAC, WAV, FLAC, AIFF, DSD |
| Video Features | HDR10+, Dolby Vision |
Provides introductory information and guidance on using the user guide.
Lists and describes the accessories included with the AV receiver.
Explains battery insertion and the operating range of the remote control.
Details the various functions and features the AV receiver offers.
Describes helpful companion apps like AV SETUP GUIDE and MusicCast Controller.
Identifies and explains the main unit's components and front panel controls.
Explains the icons and data displayed on the unit's front screen.
Details the various input/output jacks and ports on the rear of the unit.
Identifies buttons and functions of the supplied remote control.
Provides preliminary steps and advice before operating the unit.
Details speaker types, their functions, and recommended placement.
Outlines the sequence of steps for setting up the unit and connected devices.
Provides recommendations for speaker placement for optimal audio performance.
Explains how to select and enjoy various sound programs and surround decoders.
Describes how to play back audio without applying any sound field effects.
Details how to enjoy Dolby Atmos and DTS:X content for immersive audio.
Covers features for enhancing sound quality, bass, and dialogue clarity.
Outlines the fundamental steps for playing video and music content.
Explains the items and indicators shown during playback and browsing.
Explains how to play audio from a TV using HDMI or optical connections.
Covers setting up and tuning into FM, AM, and DAB radio stations.
Allows setting a timer for the unit to switch to standby mode automatically.
Enables one-touch selection of input sources and favorite settings.
Allows registering favorite content for quick access via shortcuts.
Explains how to set up playback in multiple rooms using zone functions.
Illustrates different ways to set up speakers in multiple zones.
Details how to connect speakers for zone output using internal or external amplifiers.
Covers turning zones on/off and basic playback procedures within zones.
Introduces the "Option", "Setup", and "Front Display" menus for configuration.
Explains how to adjust playback settings for different sources via the Option menu.
Provides a comprehensive list of configurable settings available in the Setup menu.
Details how to configure speaker impedance, size, crossover, and layout.
Covers HDMI control, ARC, video format, and other HDMI-related configurations.
Explains adjustments for tone, DSP parameters, surround decoders, and dialogue.
Explains how to update the unit's firmware via network or USB.
Provides initial checks to perform when the unit does not function properly.
Addresses problems related to power on/off and synchronization with the TV.
Covers issues related to no sound, distorted sound, or specific speaker problems.
Addresses problems related to no video output or incorrect video signals.
Helps resolve issues with Bluetooth connection and playback.
Lists error messages, their causes, and remedies for front display indications.
Provides instructions on how to clean and maintain the unit's front panel.
Guides on selecting and setting up a wireless network connection method.
Lists compatible Bluetooth devices, USB devices, and audio/video file formats.
Provides detailed technical specifications for the unit's hardware and features.
Lists the default settings for the Option, Setup, and Front Display menus.
To Next Page