Need help?Do you have a question about the Yamaha AVENTAGE RX-A680 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.06% |
| HDMI eARC | Yes |
| HDMI CEC | Yes |
| Phono Input | Yes |
| Optical Inputs | 2 |
| Coaxial Inputs | 2 |
| Subwoofer Outputs | 2 |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| AirPlay | AirPlay 2 |
| DSP Programs | 17 |
| Tuner Section | FM/AM |
| Amplifier Type | AV Receiver |
| HDMI Outputs | 1 |
| USB Input | Yes |
| Speaker Terminals | 9 |
| Network Connectivity | Ethernet |
| Streaming Services | Spotify, Pandora, Deezer, TIDAL |
| Supported Audio Formats | MP3, WMA, MPEG-4 AAC, FLAC, WAV, AIFF, DSD |
| Surround Sound Processing | Dolby Atmos, DTS:X |
| Video Features | 4K Ultra HD, HDR |
Explains how to read the manual and its conventions.
Lists and describes the accessories included with the product.
Instructions for inserting batteries into the remote control.
Details the effective range and angle for remote control operation.
Overview of the unit's capabilities and functions.
Explains how to set up different speaker configurations.
Describes the YPAO function for automatic speaker calibration.
Details the unit's sound programs and surround decoders.
Explains network connectivity for enjoying various content.
Information on connecting and playing content from different devices.
Explains the SCENE function for one-touch setup selection.
Highlights features like wireless speaker support and Bluetooth audio.
Describes the AV SETUP GUIDE mobile application.
Describes the AV CONTROLLER mobile application.
Describes the MusicCast CONTROLLER mobile application.
Identifies and explains the controls and indicators on the front panel.
Continues identifying and explaining front panel controls and indicators.
Explains the indicators and display elements on the front panel.
Identifies and explains the connectors and jacks on the rear panel.
Identifies and explains the buttons and functions of the remote control.
Guides on connecting speakers to the unit.
Details the roles and abbreviations of different speaker types.
Explains speaker layouts for different channel configurations.
Lists the technical requirements for connected speakers and subwoofers.
Instructions for setting speaker impedance, especially for 6-ohm speakers.
Provides step-by-step guidance on connecting speaker cables.
Instructions for connecting a subwoofer using an audio pin cable.
Details speaker placement for different channel configurations.
Details speaker placement for a 7.1-channel system.
Details speaker placement for a 5.1-channel system.
Details speaker placement for a 3.1.2-channel system.
Explains the Virtual CINEMA FRONT feature and its setup.
Guides on connecting front speakers for bi-amp functionality.
Guides for connecting a TV via HDMI and composite video.
Instructions for connecting a TV via HDMI, including ARC.
Instructions for connecting a TV via composite video cable.
Guides for connecting playback devices via HDMI and other cables.
How to connect video devices via HDMI.
How to connect devices using composite video and audio cables.
How to connect audio devices like CD players using various audio jacks.
Instructions for using the front panel AUX jack for portable devices.
Guides for connecting FM/AM and DAB/FM antennas.
How to connect FM and AM antennas.
How to connect DAB/FM antennas.
Guides for setting up wired and wireless network connections.
Overview of wired and wireless network connection options.
Guide to connecting the unit to a network using a wired connection.
Instructions on how to position wireless antennas for optimal connection.
Final step to connect the power cable after all connections are made.
Step-by-step guide to setting the on-screen display language.
Manually configuring speaker settings before YPAO setup.
Manually configuring speaker settings before YPAO setup.
Explains the YPAO function for automatic speaker calibration.
Continues the YPAO measurement and result confirmation process.
Lists YPAO error messages, their causes, and remedies.
Lists YPAO warning messages, their causes, and remedies.
Guides for setting up and using the MusicCast system.
Introduces the MusicCast wireless multi-room audio system.
How to use the MusicCast CONTROLLER app.
Steps to connect the unit to the MusicCast network.
Overview of enjoying various sound field effects.
How to select sound modes using the remote control.
Details on using CINEMA DSP 3D for immersive sound.
How to select sound programs based on content type (movie, music).
Using Virtual CINEMA DSP when surround speakers are absent.
Using Virtual CINEMA FRONT for front-placed surround sound.
How to enjoy surround sound with headphones using SILENT CINEMA.
Using the STRAIGHT button for direct playback of stereo/multichannel sources.
Using surround decoders for multichannel playback without DSP.
How to use the Extra Bass feature for enhanced bass.
Using Compressed Music Enhancer for compressed audio.
Information on enjoying Dolby Atmos and DTS:X content.
Explains the Zone A/B function for multi-room audio playback.
How to connect speakers for Zone B operation.
Basic procedure for playing music in Zone B using the remote control.
Adjusting volume differences between Zone A and Zone B.
How to adjust Zone B volume independently using the remote control.
Basic steps for playing back video and music.
How to cycle through display information using the INFO button.
Explains items and controls on the playback screen displayed on TV.
Explains items and controls on the browse screen for selecting content.
How to set FM/AM tuning frequency steps for different regions.
How to tune into a radio station by specifying its frequency.
How to tune into a registered radio station using preset numbers.
Automatically registers FM radio stations with strong signals.
How to manually register a radio station to a preset number.
How to clear registered radio stations from preset numbers.
Prepares for DAB tuning by performing an initial scan.
How to select a DAB radio station after an initial scan.
How to tune into a registered DAB station using preset numbers.
How to register a DAB radio station to a preset number.
How to clear registered DAB radio stations from preset numbers.
How to view various DAB information when tuned to a station.
How to check the reception strength of DAB channels.
How to tune into an FM station by specifying its frequency.
How to tune into a registered FM station using preset numbers.
Automatically registers FM radio stations with strong signals.
How to manually register an FM station to a preset number.
How to clear registered FM radio stations from preset numbers.
How to view Radio Data System information for FM stations.
How to play music from a Bluetooth device on the unit.
How to enjoy audio from the unit via Bluetooth speakers/headphones.
How to play iTunes/iPhone music via AirPlay over the network.
How to play music files stored on a USB storage device.
Steps to set up media sharing on servers for playback.
How to play music files from media servers.
Continues instructions for playing back music from media servers.
How to select and play an Internet radio station.
How to add favorite Internet radio stations to the "Favorites" folder.
How to listen to streaming services using MusicCast CONTROLLER.
Explains the SCENE function for quick setup selection.
How to register custom settings to SCENE keys.
How to register favorite content (Bluetooth, USB, server) as shortcuts.
How to recall registered content using shortcut numbers.
How to navigate and use the Option menu for playback settings.
Lists available items in the Option menu and their functions.
How to switch between different input sources.
How to adjust Treble and Bass settings.
Guides on selecting sound programs and surround decoders.
How to select sound programs and stereo playback modes.
Lists and describes various sound programs for different genres.
How to select a surround decoder for audio processing.
Guides on adjusting sound field effect and dynamic range.
How to adjust the sound field effect level.
How to automatically adjust dynamic range based on volume.
How to enable/disable the Compressed Music Enhancer.
Guides for correcting volume differences between sources.
How to correct volume differences between input sources.
How to fine-tune the subwoofer volume.
How to adjust volume differences between Zone A and Zone B.
How to enable/disable the Lipsync adjustment feature.
How to check details of incoming video and audio signals.
How to play audio from one source with video from another.
How to select a video source to output with a selected audio source.
How to switch FM reception between stereo and monaural modes.
How to automatically register radio stations via Auto Preset.
How to clear registered radio stations from presets.
How to configure playback shuffle settings for USB/Server.
How to configure playback repeat settings for USB/Server.
How to enable/disable volume control from iTunes/iPhone via AirPlay.
How to register an Internet radio station to the Favorites folder.
How to remove an Internet radio station from the Favorites folder.
How to perform an initial scan for DAB radio stations.
How to check the reception strength of DAB channels.
Basic operation of the Setup menu for configuring unit functions.
A table listing Setup menu items, their functions, and page references.
Continues the list of Setup menu items and their functions.
Continues the list of Setup menu items, covering Bluetooth and Language.
Guides for configuring speaker system, subwoofer, and speaker sizes.
Selects the speaker system configuration based on connected speakers.
Configures settings related to the subwoofer's presence and function.
Selects the size (Small/Large) for the front speakers.
Configures the center speaker's size and usage.
Configures the surround speakers' size and usage.
Configures the surround back speakers' size and usage.
Configures the presence speakers' size and usage.
Selects the layout pattern for presence speakers.
Sets the crossover frequency for small speakers.
Adjusts the subwoofer phase for optimal bass response.
Enables or disables the Extra Bass feature.
Enables or disables the Virtual CINEMA FRONT feature.
Sets the distance from each speaker to the listening position.
Adjusts the volume level for each individual speaker.
Selects and adjusts the equalizer settings.
Enables/disables test tone output for speaker/equalizer adjustment.
Guides for configuring HDMI control, output, standby, and upscaling.
Enables or disables HDMI Control for operating external devices.
Enables/disables audio output from the TV speaker via HDMI OUT.
Configures video/audio output to TV when the unit is in standby.
Enables or disables 4K upscaling for HDMI video signals.
Selects the HDCP version for HDMI input jacks.
Selects the audio input jack for TV audio input when HDMI Control is On.
Links the unit's standby mode to the TV's power via HDMI Control.
Enables or disables the Audio Return Channel (ARC) function.
Enables/disables SCENE link playback for HDMI Control-compatible devices.
Guides for configuring Center Spread, Center Image, and Monaural Mix.
Spreads center channel signals to left/right for 2-channel sources.
Adjusts center localization effect for the front sound field.
Enables or disables monaural sound output.
Selects the method for adjusting video/audio delay.
Manually adjusts the delay between video and audio output.
Adjusts the volume of dialogue sounds that are hard to hear.
Adjusts dialogue volume specifically for DTS:X content.
Adjusts the perceived height of dialogue sounds.
Switches the scale used for the volume display (dB or numeric).
Selects dynamic range adjustment for bitstream audio.
Sets the maximum limit for volume adjustment.
Sets the initial volume level when the unit is powered on.
Configures how Zone B volume syncs with Zone A volume.
Guides for setting auto-standby time and eco mode.
Sets the time duration before the unit enters auto-standby mode.
Enables or disables the eco mode for power saving.
Guides for input renaming, input skipping, and display brightness.
Automatically renames input sources using the Auto Rename function.
Allows manual renaming of input sources on the front display.
Configures which input sources are skipped when using the INPUT knob.
Adjusts the brightness level of the front display.
Enables Memory Guard to prevent unintended setting changes.
Assigns functions to the remote's color keys.
Guides for checking network info and setting connection methods.
Displays network connection status, SSID, IP address, etc.
Selects between wired and wireless network connection methods.
Configures network parameters automatically using DHCP.
Manually configures network parameters like IP address and subnet mask.
Sets a MAC address filter to limit access from network devices.
Allows Digital Media Controllers to control playback via the network.
Enables the unit to be turned on from other network devices.
Edits the network name displayed for the unit.
Links power on/off of MusicCast devices with the unit.
Updates the unit's firmware over the network.
Guides for Bluetooth function, connection termination, and standby.
Enables or disables the Bluetooth function.
How to disconnect a Bluetooth device from the unit.
Enables or disables the unit turning on from Bluetooth devices.
Enables the Bluetooth audio transmitter function for wireless audio.
Establishes connection to Bluetooth devices for audio transmission.
Guides for selecting the on-screen menu language.
Selects the desired language for the on-screen menus.
Guides for basic operation and items within the Advanced Setup menu.
How to navigate and operate the Advanced Setup menu.
Lists items available in the ADVANCED SETUP menu.
Changes speaker impedance settings (U.S.A. and Canada models only).
Selects the unit's remote control ID for multi-receiver use.
Changes FM/AM tuning frequency steps based on region.
Switches the video signal type for HDMI output to match the TV.
Selects the HDMI 4K signal format for compatible TVs and devices.
Informs BD player about supported DTS formats.
Backs up and restores all unit settings using a USB memory device.
Restores the unit to its factory default settings.
Updates the unit's firmware using a USB memory device or network.
Checks the currently installed firmware version.
Provides solutions for common problems and errors.
General troubleshooting steps and initial checks for problems.
Troubleshooting power, system, and remote control issues.
Continues troubleshooting power, system, and remote control issues.
Troubleshooting when the unit becomes unresponsive.
Troubleshooting issues with remote control operation.
Solves issues with selecting input sources using the INPUT knob.
Troubleshoots non-operational color keys on the remote control.
Troubleshooting steps for audio-related issues.
Troubleshooting steps when there is no audio output.
Troubleshooting issues with low maximum volume settings.
Troubleshooting no sound from individual speakers.
Troubleshooting no sound from surround back speakers.
Troubleshooting no sound from the subwoofer.
Troubleshooting no HDMI audio from playback devices.
Troubleshooting no TV sound when HDMI Control is active.
Solves issues where only front speakers work on multichannel audio.
Troubleshooting sources of noise or hum during operation.
Troubleshooting distorted audio playback.
Troubleshooting steps for video-related issues.
Troubleshooting steps when no video is displayed.
Troubleshooting no video from HDMI-connected playback devices.
Troubleshooting HDCP-related image issues from playback devices.
Troubleshooting when the unit's menu is not visible on the TV.
Troubleshooting FM/AM radio reception and station selection issues.
Troubleshooting weak or noisy FM radio reception.
Troubleshooting weak or noisy AM radio reception.
Troubleshooting automatic station selection issues.
Troubleshooting issues with registering AM radio stations as presets.
Troubleshooting DAB radio reception and information issues.
Troubleshooting no DAB radio reception.
Troubleshooting no DAB reception after initial scan.
Troubleshooting weak or noisy DAB radio reception.
Troubleshooting issues with DAB information display.
Troubleshooting no sound from DAB radio.
Troubleshooting issues related to USB device detection and playback.
Troubleshooting issues with USB device detection.
Troubleshooting issues viewing USB folders and files.
Troubleshooting playback issues with USB files.
Troubleshooting network connection and feature issues.
Troubleshooting when network features are not working.
Troubleshooting wireless internet connection issues.
Troubleshooting issues where the wireless network is not detected.
Troubleshooting issues detecting media servers (PC/NAS).
Troubleshooting issues viewing or playing files from media servers.
Troubleshooting issues with playing Internet radio.
Troubleshooting iPhone recognition issues when using AirPlay.
Troubleshooting mobile app detection issues for the unit.
Troubleshooting failed firmware updates over the network.
Troubleshooting Bluetooth connection and playback issues.
Troubleshooting failure to establish a Bluetooth connection.
Troubleshooting no sound or interrupted audio during Bluetooth playback.
Lists error messages, their causes, and remedies shown on the front display.
Continues the list of error messages, causes, and remedies.
Information on how to update the unit's firmware using the network.
Detailed steps to perform firmware updates over the network.
How to enjoy 5.1.2/5.1 systems with wireless surround speakers.
Lists devices that support the MusicCast Surround function.
Continues setup for MusicCast Surround function and YPAO.
Guides on selecting a wireless connection method for your network.
Guides on selecting a wireless connection method for your network.
Easy wireless setup using the WPS button on the router.
Wireless setup using connection settings from an iOS device.
Connects wirelessly by selecting an access point from a list.
Manually configures wireless connection by entering SSID, security key.
Sets up wireless connection by entering unit's PIN code into router.
Details of various video/audio jacks and cables.
Details of HDMI, VIDEO, OPTICAL, COAXIAL, AUDIO, and Stereo jacks.
Explains VIDEO jacks for analog video signals.
Explains OPTICAL, COAXIAL, AUDIO jacks for audio signals.
Guides on presence speaker layout and installation.
Describes three layout patterns for presence speakers.
Guides on installing presence speakers in the Front Height position.
Guides on installing presence speakers in the Overhead position.
How to use Dolby Enabled speakers as presence speakers.
Provides definitions for audio, HDMI, network, and Yamaha technologies.
Definitions of audio decoding formats like Dolby Atmos, DTS:X.
Defines audio decoding formats such as Dolby Atmos, DTS:X, etc.
Defines terms like Bi-amplification, LFE, Lip Sync, HDMI, x.v.Color.
Defines terms related to HDMI and video signals.
Defines network terms like SSID, Wi-Fi, WPS.
Defines Yamaha-specific technologies like CINEMA DSP, YPAO.
Lists supported Bluetooth, USB, AirPlay devices and file formats.
Lists supported Bluetooth devices.
Lists supported USB devices and formats.
Lists supported AirPlay devices.
Lists supported audio file formats.
Illustrates how video signals flow through the unit.
Illustrates how video signals flow through the unit.
Provides details on HDMI Control and synchronized operations.
Explains HDMI Control and how it synchronizes device operations.
Continues explanation of HDMI Control and synchronized operations.
Explains how to use the Audio Return Channel (ARC) feature.
Confirms HDMI signal compatibility with the unit.
Lists trademarks used in the manual.
Details unit specifications including jacks, HDMI, tuner, USB, Bluetooth.
Details the types and number of input jacks on the unit.
Details the types and number of output jacks on the unit.
Lists HDMI features, video formats, and audio formats supported.
Details the analog tuner specifications.
Details USB specifications like capacity and version.
Details Bluetooth specifications like function, profile, codec, version.
Details network specifications like Wi-Fi function and security.
Lists compatible audio decoding formats.
Details rated output power for various speaker configurations.
Details specifications for Bass/Treble Boost/Cut and Turnover.
Lists filter characteristics for HPF and LPF.
Details video signal types and levels.
Details FM tuner specifications like tuning range and sensitivity.
Details harmonic distortion specifications for monaural and stereo.
Details antenna input specifications.
Details AM tuner tuning range.
Details DAB tuner tuning range and supported audio formats.
Details power supply, power consumption, dimensions, and weight.
Lists default settings for Option and Setup menus.
Lists default settings for the Option menu items.
Lists default settings for the Setup menu items.
Continues listing default settings for the Setup menu.
Lists default settings for the ADVANCED SETUP menu.
To Next Page
