Need help?Do you have a question about the Yamaha RXV565 - RX AV Receiver and is the answer not in the manual?
General| Power Output | 90 W per channel (8 ohms, 20 Hz - 20 kHz, 0.09% THD) |
|---|---|
| Channels | 7.1 |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Network Capability | No |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| THD | 0.09% |
| Audio D/A Converter | 192 kHz/24-bit |
| DSP Presets | 17 |
| Tuner Presets | 40 |
| Digital Sound Processor (DSP) | Yes |
| Phono Input | Yes |
| USB Port | No |
| Bluetooth | No |
| Wi-Fi | No |
| Amplifier Output Details | 7 channels |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Surround Sound Effects | Yes |
| Digital Audio Inputs | 3 optical |
Essential safety notices, warnings, and regulatory compliance information.
Guidelines for safe and optimal unit operation, covering environment, usage, and handling.
Important warnings, regional notes, and serial number recording guidance.
A quick guide to prepare, connect, and turn on the unit for initial use.
Recommended speaker placement for 7.1, 6.1, and 5.1 channel surround sound.
Guide to connecting speakers to the correct terminals for 7.1, 6.1, and 5.1 channel configurations.
Step-by-step instructions for connecting speaker cables securely and correctly.
Instructions for connecting TVs or projectors via HDMI, Component, or Composite video.
Procedure for automatically adjusting speaker output characteristics using YPAO.
Understanding YPAO results and confirming the auto setup configuration.
Procedures for resolving errors or warnings encountered during YPAO measurement.
Comprehensive list of setup menu categories including Speaker, Sound, Function, Display, and Volume.
Guide to navigating the setup menu screens and making basic adjustments.
Detailed speaker configuration options including LFE, Surround, Crossover, and Phase.
Adjusting speaker volume levels, timing, and tone quality with equalizer.
Adjusting HDMI sync function and audio/video delay settings.
Settings for automatic/manual speaker setup and configuration (size, LFE).
Settings for Dynamic Range and Lipsync (audio/video delay).
To Next Page
