Need help?Do you have a question about the Yamaha AX-400 and is the answer not in the manual?
Guidance on optimal placement to avoid heat, dust, cold, and moisture.
Importance of unobstructed openings for amplifier cooling and preventing damage.
Proper procedures for power cord, relocation, and self-servicing.
Specific wiring code information for the British model's mains lead.
Instructions for setting local voltage before plugging in the unit.
How to connect left/right speaker channels, polarity, and wire preparation.
Connecting turntable output and ground wire to the amplifier's phono input.
Connecting tuner output jacks to the amplifier's tuner input.
Connecting CD and video sound outputs to respective amplifier inputs.
Detailed steps for connecting Tape Deck 1 and Tape Deck 2 inputs/outputs.
Information on using the amplifier's switched and unswitched AC outlets.
How to turn the unit on/off and initial volume setting.
Indicates when the amplifier is powered on.
Selecting speaker systems A, B, or both, or for headphone use.
How to select the desired audio source and signal channelling examples.
Connecting stereo headphones to the unit.
Adjusting bass response, with a defeat position for flat response.
Adjusting treble response, with a defeat position for flat response.
Adjusting relative volume between left and right channels.
Selecting between MM and MC cartridge types for the phono input.
Compensates for low-volume frequency response loss.
Controls the overall sound level of the amplifier.
Step-by-step guide for standard listening procedures.
Instructions for setting up and performing audio recording from a source.
How to perform tape-to-tape dubbing and monitoring.
To Next Page
General
