Need help?Do you have a question about the Yamaha AX-440 and is the answer not in the manual?
General| Input Sensitivity | 150 mV (line) |
|---|---|
| Speaker Load Impedance | 4 - 16 ohms |
| Power Output | 60 W per channel (8 ohms) |
| Frequency Response | 20Hz to 20kHz |
| Signal-to-Noise Ratio | 100dB (line) |
| Channel Separation | 60 dB |
| Output | Speaker outputs (A, B) |
Proper placement to avoid heat, dust, moisture, and ensure airflow for operation.
Guidelines for safe handling of the power cord, cleaning the unit, and avoiding internal servicing.
Warnings on object/liquid entry, Canadian plug safety, and consulting the troubleshooting chart.
Color coding for mains lead connection to ensure correct wiring in British models.
Crucial step to set the voltage selector to match local power before plugging in the unit.
How to connect speaker wires, ensuring correct polarity and wire preparation.
Connect turntable output and ground wire to Phono jacks and GND terminal.
Connect tuner output jacks to the amplifier's TUNER jacks.
Connect CD and video/aux audio outputs to their respective terminals.
Details for connecting Tape Deck 1 and Tape Deck 2 Line In/Out to REC OUT/PB jacks.
Information on switched and unswitched AC outlets and their wattage limits.
How to turn the unit on/off and the function of the power indicator light.
Selecting speaker systems A, B, or both, or using headphones.
Selecting program sources and the function of the CD Direct switch.
Adjusting sound level, bass, treble, and channel balance.
Phono cartridge selection and loudness compensation for low volumes.
Steps for listening to audio, including power on, speaker selection, and source selection.
Procedure for recording from a source onto a tape deck and performing tape dubbing.
Using Tape MON switches for monitoring and advantages with an equalizer.
Solutions for no power, no sound from inputs, or no sound from one speaker.
Addressing issues like lack of bass, humming, or howling sounds during playback.
Explains tone control bypass and sudden sound cut due to speaker protection.
Advice to consult a dealer for any amplifier malfunctions not covered.
Details RMS and dynamic output power per channel for various models.
Specifications for input sensitivity and impedance for various sources.
Tone control boost/cut ranges, turnover frequencies, and loudness control characteristics.
Information on power supply voltages, consumption, and unit weight.
To Next Page
