Yamaha BANSHEE YFZ350Y User Manual

8-49
1
2
3
4
5
6
7
8
9
10
11
EBU25610
Replacing the tail/brake light bulb
If the tail/brake light bulb burns out, replace it as
follows.
1. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
2. Remove the defective bulb by pushing it in
and turning it counterclockwise.
3. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
4. Install the bulb holder (together with the bulb)
by turning it clockwise.
EBU25651
Removing a wheel
1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Tail/brake light bulb holder
1
1. Tail/brake light bulb holder
2. Tail/brake light bulb
1
2

Yamaha BANSHEE YFZ350Y Specifications

General

Brand	Yamaha
Model	BANSHEE YFZ350Y
Category	Offroad Vehicle
Language	English