Yamaha CRYPTON T110C - Shift Pedal; Brake Lever

INSTRUMENT AND CONTROL FUNCTIONS
3-4
3
EAU12400
Dimmer switch “ / ”
Set this switch to “ ” for the high
beam and to “ ” for the low beam.
EAU12460
Turn signal switch “ / ”
To signal a right-hand turn, push this
switch to “ ”. To signal a left-hand
turn, push this switch to “ ”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12500
Horn switch “ ”
Press this switch to sound the horn.
EAU12711
Start switch “ ”
Push this switch to crank the engine
with the starter. See page 5-1 for start-
ing instructions prior to starting the en-
gine.
EAU37461
Shift pedal
The shift pedal is located on the left
side of the motorcycle. This motorcycle
is equipped with a constant-mesh 4
speed transmission.
TIP
Use your toes to shift up and your heel
to shift down.
EAU12891
Brake lever
The brake lever is located on the right
side of the handlebar. To apply the front
brake, pull the lever toward the throttle
grip.
1. Shift pedal
2. Neutral position
1
2
2
1
2
3
4
N
N
3
2
1
4
1. Brake lever
1
U40BE2E0.book Page 4 Wednesday, October 10, 2012 8:01 AM