EasyManua.ls Logo

Yamaha BWS CW50 User Manual

Yamaha BWS CW50
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PANTONE285C
CW50
CW50L
CW50N
OWNER’S MANUAL
2B6-F8199-E1
Read this manual carefully before operating this vehicle.
[English (E)]

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Yamaha BWS CW50 and is the answer not in the manual?

Yamaha BWS CW50 Specifications

General IconGeneral
Displacement49 cc
Fuel SystemCarburetor
TransmissionV-belt automatic
Front SuspensionTelescopic fork
Rear SuspensionUnit swing
Rear BrakeDrum
Bore x Stroke40.0 mm x 39.2 mm
IgnitionCDI
Starting SystemElectric and kick
Final DriveV-Belt
Front Tire120/90-10
Wheelbase1, 255 mm
Ground Clearance115 mm
Front BrakeDisc

Summary

OWNER'S MANUAL

IMPORTANT MANUAL INFORMATION

Hazard Warnings

Indicates a hazardous situation that could cause death or serious injury.

SAFETY INFORMATION

Be a Responsible Owner

Owner's responsibility for safe and proper operation of the scooter.

Safe Riding Practices

Perform pre-operation checks for safe operating condition and proper riding techniques.

Protective Apparel

Importance of safety helmet, face shield, jacket, trousers, and gloves for injury prevention.

Avoid Carbon Monoxide Poisoning

Precautions against deadly carbon monoxide gas from exhaust.

Loading and Cargo

Guidelines for adding accessories or cargo to avoid affecting stability.

Further Safe-Riding Points

Additional tips for safe operation, including signaling, braking, and road conditions.

INSTRUMENT AND CONTROL FUNCTIONS

Main Switch and Steering Lock Operation

Explanation of the main switch positions and how to lock the steering.

Handlebar Switches

Details of controls on the left and right handlebar grips.

Fueling Precautions

Safety instructions for refueling to prevent fire and explosion risks.

2-Stroke Engine Oil

Checking and refilling the 2-stroke engine oil for proper lubrication.

PRE-OPERATION CHECKS

Pre-Operation Inspection Items

Checklists for fuel, engine oil, brakes, and other critical components before riding.

OPERATION AND IMPORTANT RIDING POINTS

Starting a Cold Engine

Procedure for starting the engine when it is cold, including use of choke and starter.

Braking Procedures

Correct techniques for applying brakes, especially on wet roads or slippery surfaces.

Engine Break-In Guidelines

Recommended procedures for the initial 1000 km to ensure engine longevity.

PERIODIC MAINTENANCE AND ADJUSTMENT

General Maintenance and Lubrication

Chart detailing regular maintenance and lubrication tasks for various scooter parts.

Spark Plug Inspection and Maintenance

Procedure for checking, cleaning, and replacing the spark plug.

Final Transmission Oil Service

Procedure for checking and changing the final transmission oil.

Air Filter Element Cleaning

How to clean the air filter element, especially in dusty or wet conditions.

Tire Air Pressure

Correct tire air pressure settings based on load and riding conditions.

Tire Inspection for Wear and Damage

How to inspect tires for tread depth, damage, and wear indicators.

Brake Fluid Level Check

Procedure for checking the brake fluid level and its importance for braking performance.

Troubleshooting Guide

Introduction to the troubleshooting chart for diagnosing common operational issues.

Troubleshooting Chart

A step-by-step chart to help diagnose and resolve common engine and starting problems.

SCOOTER CARE AND STORAGE

SPECIFICATIONS

Related product manuals