FOR YOUR SAFETY – PRE-OPERATION CHECKS
4-2
4
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-23
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-20, 6-22
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-14, 6-16
Shift pedal
• Make sure that operation is smooth.
• Correct if necessary.
6-17
Brake pedal
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
6-24
Brake lever
• Make sure that operation is smooth.
• Lubricate lever pivoting point if necessary.
6-23
Centerstand, sidestand (for
sidestand-equipped models)
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
6-24
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
ITEM CHECKS PAGE
U40BE2E0.book Page 2 Wednesday, October 10, 2012 8:01 AM
To Next Page
Loading...
