1
2
3
4
5
6
7
8
9
6-27
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUT2134
Replacing the headlight bulb
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
ECA10650
NOTICE
Take care not to damage the follow-
ing parts:
● Headlight bulb
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency
of the glass, the luminosity of the
bulb, and the bulb life will be ad-
versely affected. Thoroughly clean
off any dirt and fi ngerprints on the
headlight bulb using a cloth moist-
ened with alcohol or thinner.
● Headlight lens
• Do not affix any type of
tinted film or stickers to the
headlight lens.
• Do not use a headlight bulb
of a wattage higher than
specifi ed.
1. Place the vehicle on the center-
stand.
2. Remove panel B. (See page 6-7.)
3. Disconnect the headlight coupler,
and then remove the bulb cover.
ZAUM00**
1
1. Bulb cover
4. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
ZAUM00**
1
1. Headlight bulb holder
5. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
6. Install the headlight bulb cover,
and then connect the coupler.
7. Install the panel.
8. Have a Yamaha dealer adjust the
headlight beam if necessary.
4P9-F8199-E5_CS.indd 6-274P9-F8199-E5_CS.indd 6-27 2011/09/06 14:18:412011/09/06 14:18:41
Process BlackProcess Black
To Next Page
Loading...
