Yamaha DSP-1 - Using Integrated Amplifier (with PRE-OUT;MAIN-IN)

DSr-1
@
USING
WITH
THE
INTEGRATED
AMPLIFIER
OR
RECEIVER
HAVING
PRE-OUT
AND
MAIN-IN
JACKS
@ Set the FRONT MIX switch of this unit to “OFF 6ch”.
@
When
only
two
sub
speakers
are
used,
the
FRONT
MIX
switch
setting
and
the
PROCESSING
jack
connections
and
different.
Refer
to
page
10.
|
@
When
the
COUPLER
switch
is
provided
with
the
integrated
amplifier
or
receiver,
set
the
switch
to
ON
(SEPARATE).
When
the
PRE
OUT
jacks
and
MAIN
IN
jacks
are
shorted
with
jumper
pins,
unplug
the
jumper
pins
before
making
connections.
or receiver | PRE OUT
Main speakers
MAIN IN
Integrated a BB nes
amplifier
Set the switch to “OFF 6ch”.
qe
Power amplifier
FRONT MIX
soe N AN LLY
s |
6ch ách
MONO OUT FRONT MX
FULE BAND
rear panel
Power amplifier
MAIN LEVEL
OdB
~iOdB
O
Z
ce
!
R
Set
this
switch
to
"—10dB".
“To
drive
the
sub
speakers,
we
recommend
to
use
the
C)
YAMAHA M-35 power amplifier (optional).