Need help?Do you have a question about the Yamaha DT100A 1974 and is the answer not in the manual?
General| Fuel System | Carburetor |
|---|---|
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Brake | Drum |
| Rear Brake | Drum |
| Wheelbase | 1, 280 mm |
| Engine Type | Single-cylinder, 2-stroke |
| Power Output | 10 hp |
| Fuel Capacity | 7.5 liters |
| Bore x Stroke | 52.0 mm x 46.0 mm |
Comprehensive technical specifications for DT100, DT125, and DT175 models.
Detailed maintenance specifications for DT100, DT125, and DT175 models.
Procedures for inspecting and adjusting the carburetor and air cleaner.
Adjusting contact breaker points and ignition timing using specialized tools.
Detailed instructions for disassembling various engine parts like cylinder and crankcase.
Procedures for inspecting and repairing engine parts such as cylinder, piston, and clutch.
Guide for reassembling engine components and making necessary adjustments.
Overview and detailed breakdown of the carburetor for DT100, DT125, and DT175 models.
Procedures for checking carburetor components and troubleshooting common issues.
Instructions for reassembling the carburetor and setting the float level.
Instructions for inspecting and maintaining the drive chain and sprockets.
Detailed steps for disassembling, inspecting, and assembling the front forks.
Procedures for checking ignition system components like spark plug and coil.
Methods for testing the charging system, including voltage and current checks.
Description and testing procedures for the DT125C ignition system.
Procedures for checking the starter dynamo, charging mode, and voltage.
Guides for diagnosing and resolving common engine and electrical issues.
To Next Page