Need help?Do you have a question about the Yamaha DT175A 1974 and is the answer not in the manual?
General| Displacement | 171 cc |
|---|---|
| Fuel System | Carburetor |
| Starting System | Kick start |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Front Brake | Drum |
| Rear Brake | Drum |
| Rear Tire | 4.00-18 |
| Seat Height | 810 mm |
| Engine Type | 2-stroke, single cylinder |
| Bore x Stroke | 66 mm x 50 mm |
| Rear Suspension | Swingarm with dual shocks |
| Wheelbase | 1, 340 mm |
Outlines recommended maintenance intervals for various motorcycle components based on mileage.
Covers periodic inspections and adjustments for the engine, including carburetor and air cleaner.
Details periodic inspections and adjustments for the motorcycle chassis components.
Covers periodic checks and adjustments for the electrical system components.
Details the procedure for removing various engine components.
Provides step-by-step instructions for disassembling engine components.
Details inspection and repair procedures for various engine parts.
Guides through the process of reassembling and adjusting the engine.
Covers carburetor description, disassembly, checking, troubleshooting, and float level.
Covers drive sprocket, driven sprocket, and chain inspection and maintenance.
Details disassembly, inspection, and assembly of the front forks.
Covers adjustment, disassembly, inspection, and installation of the steering head.
Covers ignition system description, timing, spark gap, and coil tests.
Details charging system description, voltage output test, and silicon rectifier check.
Covers battery checking, service life, storage, and troubleshooting.
To Next Page