Need help?Do you have a question about the Yamaha DT80MX and is the answer not in the manual?
General| Displacement | 79 cc |
|---|---|
| Fuel System | Carburetor |
| Ignition | CDI |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Brake | Drum |
| Rear Brake | Drum |
| Tires Rear | 3.00-18 |
| Engine Type | Single-cylinder, 2-stroke |
| Starting System | Kick starter |
| Fuel Capacity | 7.5 L (2.0 US gal) |
Schedule for regular checks and service intervals for motorcycle components.
Recommended intervals for lubricating various parts of the motorcycle.
Inspection of the needle valve and valve seat for wear or damage.
Procedure for checking and adjusting the fuel level in the carburetor.
Checking and adjusting the reed valve stopper height and gap.
Procedure for draining and replacing the fork oil.
Steps for disassembling the front fork using special tools.
Instructions for adjusting front and rear brake systems.
Inspection and adjustment of the drive chain tension.
Procedure for checking the spark plug condition and gap.
Steps to check, clean, and adjust contact breaker points.
Procedure for checking ignition coil resistance.
Diagrams showing correct routing for various cables and wires.
Detailed specifications for maintenance tasks and intervals.
To Next Page
