What to do if my Yamaha DVD-S795 is not reading discs?
If the Yamaha DVD Player is not reading discs, it could be due to a few reasons. If condensation has formed, wait about 1 to 2 hours to allow the player to dry out. Ensure that you are using a compatible disc (DVD, Video CD, or CD). Clean the disc if it's dirty, and make sure the disc is installed with the label side facing upwards.
Why is there no sound or distorted sound from my Yamaha DVD Player?
First, ensure that all equipment is connected properly. Then, verify that the input settings for both your TV and stereo system are correct. You may also need to adjust the master volume using the On-Screen Menu Icon within the player's settings.
What to do if my Yamaha DVD Player remote control is not working?
First, ensure the player is turned on. Check that the batteries are correctly installed, paying attention to the polarities. If the batteries are depleted, replace them. Make sure you are pointing the remote control at the remote control sensor, are within 23 feet (7 m), and that there are no obstacles blocking the signal.
What to do if my Yamaha DVD-S795 has no picture?
First, ensure that all the equipment is connected properly. Also, ensure that the input setting for the TV is set to “Video”.
Why is the picture distorted during rapid advance or rapid reverse on my Yamaha DVD-S795?
The picture will be somewhat distorted at times during rapid advance or reverse; this is normal.
Why is no key operation effective on my Yamaha DVD-S795?
Some operations may be prohibited by the disc. Try pressing the POWER button to set the player to standby mode and then back to ON. Alternatively, press POWER to set the player to standby mode, disconnect the AC plug, and then reconnect it. The player may not be operating properly due to lightning, static electricity, or some other external factor.
Why is there no 4:3 (16:9) picture on my Yamaha DVD Player?
Choose the correct setup “6 TV Aspect” item which matches the TV set used.
How to turn on on-screen display on Yamaha DVD Player?
The “Off” setting is selected for “1 On-Screen Messages” in “4 On-Screen Messages”: select “On”.
How to move On-Screen Menu Icons on Yamaha DVD Player?
Change the position of the On-Screen Menu Icon using “2 Color and Position” in “4 On-Screen Messages” of the initial settings.
Why are there no subtitles on my Yamaha DVD-S795 DVD Player?
Subtitles appear only with discs which contain them. If the disc has subtitles and they are not displayed, perform the steps on page 28 to display the subtitles.
Operating Environment| operating temperature range | 5 to 35 °C |
|---|---|
| operating humidity range | 5 to 90% RH |
| signal system | NTSC |
Power| power requirements | AC 120 V, 60 Hz |
|---|---|
| power consumption | 19 W |
| standby power consumption | 1.0 W |
Video Output| component video Y output level | 1 Vp-p (75 Ω) |
|---|---|
| component video CB output level | 0.7 Vp-p (75 Ω) |
| component video CR output level | 0.7 Vp-p (75 Ω) |
Audio Output| audio output level | 2 Vrms (1 kHz, 0 dB) |
|---|---|
| audio frequency response DVD | 2 Hz–44 kHz |
| audio frequency response CD | 2 Hz–20 kHz |
Weight and Dimensions| weight | 7.9 lbs (3.6 kg) |
|---|---|
| width | 435 mm |
| depth | 263 mm |
| height | 100 mm |
Essential safety guidelines including electrical shock, laser beam, and fire hazard warnings.
Guidance on proper placement, AC cord safety, and avoiding damage from moisture or impact.
Lists and illustrates the accessories supplied with the DVD player.
Highlights high picture/sound quality, versatile DVD functions, and disc format support.
Instructions for connecting the player to AV amplifiers and TVs with various audio/video outputs.
Step-by-step guide for setting up languages, display formats, audio outputs, and other player preferences.
Explains technical terms related to video, audio, and disc playback formats.
Identifies and describes the functions of the main unit and remote control buttons.
Covers essential functions like basic play, stopping, skipping, and pausing disc playback.
Explains how to use On-Screen Menu Icons for disc information, player settings, and navigation.
Details on repeat play, program/random play, markers, language selection, and subtitle options.
Guidance on proper disc care, storage, and cleaning of the player unit.
Addresses common operational faults, symptoms, remedies, and the self-diagnosis function.
A reference list of codes for various languages used in initial settings.
Provides detailed technical data including power, dimensions, and audio/video output specifications.
To Next Page
