Yamaha E15C User Manual

4-9
EMU00357¯
MAINTENANCE CHART
Frequency of maintenance operations may be adjusted according to the operating condi-
tions, but the following table gives general guidelines.
The mark (●) indicates the check-ups which you may carry out yourself.
The mark (1) indicates work to be carried out by your Yamaha dealer.
Interval Initial Every
10 hours 50 hours 100 hours 200 hours Refer
Item (1 month) (3 months) (6 months) (1 year) page
Spark plug
Cleaning/Adjustment/
Replacement
●●● 4-12
Greasing points Greasing ● 4-10
Gear oil Change ●●4-21
Fuel system Inspection ● 4-14
Fuel filter Cleaning/Replacement ●●● 4-15
Separate fuel tank *1 Cleaning ● 4-22
Idling speed Adjustment ● 4-16
Anode/Trim tab Inspection/Replacement ● 4-23
Outboard motor exterior Inspection ●● 4-24
Cooling water
passages *2
Cleaning ●● 4-7
Propeller and cotter pin Inspection/Replacement ●● 4-18
Carburetor setting Inspection/Adjustment 11—
Ignition timing Inspection/Adjustment 11—
Bolts and nuts Retightening 114-24
*1. If equipped
*2. When operating in salt water, turbid or muddy water, the engine should be flushed with clean water
after each use.
E
63V-9-K0A0-4A 4/4/02 4:52 PM Page 26

Yamaha E15C Specifications

General

Brand	Yamaha
Model	E15C
Category	Outboard Motor
Language	English