To Next Page
W
wustevenSep 6, 2025
How to setup Yamaha E40XWH tachometer to show the oil pressure?
- DdgarciaSep 6, 2025
Select the oil press. display.
How to setup Yamaha E40XWH tachometer to show the oil pressure?
Select the oil press. display.
What to do if the Yamaha Outboard Motor gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Why Yamaha Outboard Motor illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
How to fix Yamaha Outboard Motor tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
What causes Yamaha E40XWH Outboard Motor fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
What to do if Yamaha E40XWH gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
What to do if my Yamaha Outboard Motor speedometer shows the incorrect fuel level?
If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
Why Yamaha E40XWH boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
What causes Yamaha E40XWH Outboard Motor gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
What to do if Yamaha E40XWH Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
General| Brand | Yamaha |
|---|---|
| Model | E40XWH |
| Category | Outboard Motor |
| Language | English |
Step-by-step guide for safely removing the outboard motor from its steel crate.
Details on properly positioning and mounting the outboard motor onto the boat transom.
Instructions for installing the remote oil tank for oil injection engines.
Details on propeller types, materials, and general characteristics.
Explains how to read propeller size markings and identification codes.
Guidance on choosing the correct propeller based on engine and boat application.
Specific propeller applications for various Yamaha outboard models in 2014.
Overview of different throttle control systems and their model compatibility.
Describes the features and functions of the multi-function tiller handle.
Information on analog tachometers, their applications, and models.
Details on digital tachometers, including features and applications.
Information on speedometer types, applications, and calibration.
Features and applications of the fuel management gauge, including fuel flow and consumption data.
Information on analog trim meters, their applications, dimensions, and adjustment.
Details on coolant pressure meters, their applications, dimensions, and installation.
Information on coolant temperature meters, their applications, dimensions, and installation.
Provides representative wiring diagrams for remote controls and instruments.
Common issues and solutions for digital network gauge systems.
Table outlining the functions and compatibility of the 6Y8 digital network gauge.
Wiring diagrams for dual station applications with 6Y9 gauges.
Recommendations for battery capacity, CCA rating, and types for various engine models.
Wiring examples for single and twin engine applications, including isolator equipped models.
Standard for fuel system vacuum pressure at normal operation and breaking-in.
Checklist for pre-delivery inspection to ensure customer satisfaction.
