To Next Page
H
Holly DaltonSep 6, 2025
How to setup Yamaha E40JWH Outboard Motor tachometer to show the oil pressure?
- PPamela HallSep 6, 2025
Select the oil press. display.
How to setup Yamaha E40JWH Outboard Motor tachometer to show the oil pressure?
Select the oil press. display.
What to do if the Yamaha E40JWH gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Why Yamaha E40JWH illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
How to fix Yamaha E40JWH tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
What causes Yamaha E40JWH fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
What to do if Yamaha E40JWH gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
What to do if my Yamaha E40JWH speedometer shows the incorrect fuel level?
If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
What to do if my Yamaha Outboard Motor gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or replace the gauge itself.
Why Yamaha Outboard Motor boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
What causes Yamaha Outboard Motor gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
General| Brand | Yamaha |
|---|---|
| Model | E40JWH |
| Category | Outboard Motor |
| Language | English |
Step-by-step guide for safely removing the outboard motor from its crate.
Guidance on proper motor mounting for optimal performance and reliability.
Guidance on choosing the right propeller based on engine speed and boat load.
Lists propeller applications for various models and horsepower ratings.
Describes throttle control systems and compatible models for remote controls.
Describes the features and functions of the multi-function tiller handle.
Provides wiring diagrams for the multi-function tiller handle in US models.
Applications and models for analog tachometers, essential for outboard performance monitoring.
Applications and models for digital tachometers, including trim and oil indicators.
Types and applications of speedometers, including digital and analog models.
Functions and applications of the fuel management gauge for fuel monitoring.
Wiring diagrams for digital network gauges in various engine configurations.
Table of common issues, causes, measures, and notes for gauge system.
