To Next PageTo Next PageWhat to do if the battery charge lamp lights on when operating Yamaha EDL11000SDE?
If the battery charge lamp lights on when operating your Yamaha Portable Generator, it may be due to: * **Poor contact of sub winding:** Connect tightly. * **Sub winding problem:** Check the sub winding.
Why Yamaha EDL11000SDE coolant leaks out?
If your Yamaha Portable Generator is experiencing coolant leaks, check for: * **Insufficient cooling water:** Add cooling water. * **Loose fan belt:** Adjust the belt tension. * **Radiator blockage:** Clean the radiator.
Why Yamaha Portable Generator exhaust gas is bad?
If your Yamaha Portable Generator is emitting bad exhaust gas, it could be due to: * **Clogged air cleaner element:** Clean the air cleaner element. * **Overfilled engine oil:** Remove oil to the upper limit of the gauge. * **Poor fuel quality:** Replace the fuel with good quality fuel.
What to do if the water temperature lamp lights on when operating Yamaha EDL11000SDE?
If the water temperature lamp lights on when operating your Yamaha Portable Generator, it could be due to: * **Engine overheating:** Consult the “Precaution at overheating” section in the “Radiator” section. * **Faulty water temperature sensor:** Replace the water temperature sensor. * **Faulty water temperature sensor wiring:** Repair the wiring.
What to do if Yamaha Portable Generator does not operate after electrical equipment connected?
If your Yamaha Portable Generator does not operate after electrical equipment is connected, check the following: * **Circuit breaker:** Ensure the circuit breaker is turned “ON”. * **Output terminal and socket contact:** Reinstall to ensure good contact. * **Malfunction of electrical equipment:** Request repair of the connected electrical equipment.
General| Frequency | 50 Hz |
|---|---|
| Rated Output | 8.8 kVA |
| Maximum Output | 9.5 kVA |
| Engine Type | Diesel |
| Starting System | Electric starter |
Lists critical items to check before starting the generator to ensure proper operation and prevent issues.
Step-by-step guide on how to start the generator engine, including preheating and checks.
Details the specific steps to take if the engine fails to stop using the normal starter switch method.
Addresses issues like no output, circuit breaker problems, and slow rotation with causes and countermeasures.
