What to do if there is no sound on my Yamaha EZ-220?
First, ensure that nothing is connected to the PHONES/OUTPUT jack on the rear panel, as this will prevent sound output. Also, check the Local Control setting. (See page 41.)
Why do the right-hand keys on my Yamaha Electronic Keyboard not produce sound?
When using the Chord Dictionary function (page 38) on your Yamaha Electronic Keyboard, the keys in the right-hand area are used for entering the chord root and type only, and will not produce a sound.
Why is the volume low on my Yamaha EZ-220 Electronic Keyboard and sound quality poor?
If the volume is too soft, the sound quality is poor, the rhythm stops unexpectedly, settings are reset, or songs don't play correctly, it's likely due to low or dead batteries. Replace all six batteries with new or recharged ones, or use an optional AC adapter.
How to stop noise when using a mobile phone with my Yamaha EZ-220?
Noise may occur when using a mobile phone close to the Yamaha Electronic Keyboard due to interference. Turn off the phone or move it further away from the instrument to prevent this.
What to do if the Style does not sound properly on my Yamaha Electronic Keyboard?
To ensure the Style sounds properly on your Yamaha Electronic Keyboard: * Check that the Style Volume is set to an appropriate level. * Verify that the Split Point is set correctly for the chords you are playing. * Confirm that the “ACMP ON” indicator is showing in the display by pressing the [ACMP ON/OFF] button.
Why doesn't the Style or Song play on my Yamaha EZ-220 when pressing [START/STOP]?
Ensure that the External Clock is set to OFF. Refer to “External Clock Settings” on page 41.
Why are some voices cut off on my Yamaha EZ-220 Electronic Keyboard?
The Yamaha Electronic Keyboard is polyphonic up to 32 notes. If a Style or Song is playing, some notes may be omitted from the accompaniment.
Why does my Yamaha EZ-220 footswitch have the opposite effect?
If the footswitch seems to produce the opposite effect on your Yamaha Electronic Keyboard, the polarity might be reversed. Ensure the footswitch plug is properly connected to the SUSTAIN jack before turning on the power.
What to do if part indications don't appear on my Yamaha EZ-220 Electronic Keyboard lesson?
If the part indications do not appear when pressing the [R] or [L] buttons for the Lesson on your Yamaha Electronic Keyboard, ensure that you are not pressing these buttons while a Song is playing. Stop the Song first, then select the desired part and start the Lesson.
Why doesn't the ACMP ON indicator appear on my Yamaha EZ-220 Electronic Keyboard?
Always press the [STYLE] button first when you are going to use any style-related function on your Yamaha Electronic Keyboard.
General| Control type | Buttons |
|---|---|
| MIDI-keyboard number of keys | 61 keys |
| Product color | Black |
| Volume control | Rotary |
| Sound effects quantity | 392 |
| Interface | USB |
| Headphone outputs | 1 |
| Display type | LCD |
| Battery type | AA |
| Input voltage | 12 V |
| Power source type | DC |
| Power consumption (typical) | 7 W |
| Number of batteries supported | 6 |
Weight and Dimensions| Depth | 348 mm |
|---|---|
| Width | 945 mm |
| Height | 111 mm |
| Weight | 4400 g |
To Next Page
