What to do if Yamaha F25AE Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha F25AE boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
How to setup Yamaha Outboard Motor tachometer to show the oil pressure?
Select the oil press. display.
Procedures and guidelines for securely mounting outboard motors onto a boat transom.
Details on different Yamaha remote control models and their applications.
Details on analog tachometers, including applications, dimensions, and pole number setup.
Information on digital tachometers, covering applications, dimensions, and pole number settings.
Explanation of speedometer function, applications, dimensions, and tube routing.
Functionality, applications, dimensions, and setup procedures for the fuel management gauge.
Common troubleshooting steps for issues encountered with digital network gauges and systems.
Guidance on selecting the correct battery type and capacity for Yamaha outboard motors.
General| Prop Shaft Horsepower | 25 hp |
|---|---|
| Full Throttle RPM Range | 5000-6000 RPM |
| Fuel Induction System | Electronic Fuel Injection (EFI) |
| Starting System | Electric |
| Trim & Tilt | Power Trim & Tilt |
| Gear Ratio | 2.08:1 |
| Steering | Remote |
| Cooling System | Water-Cooled |
| Engine Type | 4-Stroke, SOHC |
| Displacement | 432 cc |
| Alternator Output at W.O.T. | 12V - 16A |
| Gear Shift | F-N-R |
| Shaft Length | 508 mm (20 in) |
| Oil Pan Capacity | 1.1 L |
To Next Page
