Maintenance
67
(4) To prevent steering movement, turn the
adjuster lever to “A” (if equipped with the
adjuster lever). To hold the steering
bracket easily, raise the tiller handle to
the vertical position (if equipped with the
tiller handle).
(5) Loosen the clamp screw(s).
(6) Hold the handgrip as shown in the illus-
tration and lift up the outboard motor to
dismount it from the boat.
(7) When transporting or storing the out-
board motor while removed from a boat,
keep the outboard motor in the attitude
shown or use an outboard motor stand.
1. Handgrip
6FM-28199-75-1E0.book 67 ページ ２０１９年１０月３０日 水曜日 午前１１時２３分
To Next Page
