Operation
73
When starting the engine using the
Start/Stop button, press the button to
start the engine. The indicator for the
starting engine will come on.
When starting the engine using the
Start/Stop button on the All Start/Stop
panel, press the button to start the all en-
gines.
When the main switch is turned to “ ”
(start) with the clip removed from the en-
gine shut-off switch, the buzzer will sound.
Except the single type, if the clip is not in-
stalled to the engine shut off switch, the
buzzer will sound when the Start/Stop but-
ton is pressed.
Except the single type, if one of the en-
gines has started, it can be stopped by
pressing the Start/Stop button on the All
start/Stop panel.
EMU35923
Procedure for dual station models (main
station)
1. Place the control lever in “ ” (neutral).
6AW-9-38-1E0.book 73 ページ ２０１２年１１月２９日 木曜日 午後６時６分
To Next Page
