Yamaha F40 - Stopping Engine; Procedure

Operation
64
To increase the trolling speed, press the “ ”
switch.
To decrease the trolling speed, press the
“ ” switch.
TIP:
 The trolling speed changes approximately
50 r/min each time a switch is pressed.
 If the trolling speed has been adjusted, the
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds ap-
proximately 3000 r/min.
EMU27822
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU43794
Procedure
When using the portable fuel tank “A”, stop
the engine according to the following proce-
dure.
1. Push and hold the engine stop button or
turn the main switch to “ ” (off).
1. “ ” switch
2. “ ” switch
ZMU07595
å
ON
OFF
ZMU01779
6BG-9-3F-E0.book 64 ページ ２０１８年１１月１日 木曜日 午後５時１分
©2020 Yamaha Motor Corporation