Need help?Do you have a question about the Yamaha F40 and is the answer not in the manual?
General| Full Throttle RPM Range | 5000 - 6000 rpm |
|---|---|
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Alternator Output | 16 Amp |
| Starting System | Electric |
| Steering | Remote |
| Displacement | 747 cc |
| Prop Shaft Horsepower | 40 hp |
| Ignition System | TCI |
| Recommended Fuel | Regular unleaded gasoline (min 87 octane) |
| Recommended Engine Oil | Yamalube 4M |
| Gear Shift | F-N-R |
| Shaft Length | 20 in. |
| Trim Method | Power Trim & Tilt |
| Exhaust | Through Propeller |
Covers hazards and precautions for safe operation of the outboard motor.
Guidelines for safe boating, including alcohol, PFDs, and collision avoidance.
Explains basic boating rules, signals, and right-of-way for safe navigation.
Guidance on narrow channels, vessel right-of-way, and waterway markers.
Details on serial numbers, key numbers, and compliance labels for identification.
Instructions on reading manuals and understanding warning labels for safety.
Information on engine data logging and common warning symbols used in the manual.
Technical details on dimensions, weight, displacement, and performance.
Guidelines for motor mounting, horsepower, and required battery specifications.
Recommendations for fuel, engine oil, and selecting the correct propeller.
Diagrams and labels for identifying major outboard motor parts.
Explains operation of remote controls, tiller handle, and instrument indicators.
Details on portable fuel tanks, joints, gauges, and caps.
Information on the Yamaha Security System (Y-COP) and its function.
Procedures for initial oil filling and the crucial engine break-in period.
Essential checks before starting the engine, including fuel and controls.
Step-by-step guide for starting the engine and warming it up.
How to shift gears, stop the boat, and adjust trolling speed.
Adjusting trim angle and operating in shallow water conditions.
Proper methods for transporting, storing, and conditioning fuel for longevity.
Instructions for flushing the cooling system and cleaning the motor exterior.
A chart detailing recommended maintenance tasks and intervals.
Step-by-step guide for changing engine oil and replacing the oil filter.
Procedures for checking/servicing propellers and changing gear oil.
How to check battery status and inspect sacrificial anodes.
A guide to diagnosing and resolving common starting, power loss, and idling problems.
Troubleshooting specific alert indicators and starter malfunctions.
Actions to take for impact damage, fuse replacement, and emergency starting.
Information on the three-year limited warranty for outboard motors.
Details on parts excluded from warranty and usage outside North America.
To Next Page
