What to do if Yamaha F40BET Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha F40BET boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
General| Engine Type | 4-Stroke |
|---|---|
| Displacement | 747 cc |
| Cylinder Configuration | Inline 3 |
| Max Output | 40 hp |
| Starting System | Electric |
| Full Throttle RPM Range | 5000 - 6000 RPM |
| Cooling System | Water-Cooled |
| Steering | Remote |
| Gear Shift | F-N-R |
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Shaft Length | Long (20 inches) |
| Exhaust | Through Prop |
To Next Page
