Yamaha F40C - Page 110

GB
EMU01697¯
SPECIFICATIONS
4-1
Recommended fuel
Fuel tank capacity l (US gal, Imp gal)
Recommended engine oil
API
SAE
Engine oil capacity
(excluding oil filter) l (US qt, Imp qt)
(including oil filter) l (US qt, Imp qt)
Recommended gear oil
Gear oil capacity cm
3
(US oz, Imp oz)
Spark plug N•m (kgf•m, lb•ft)
Propeller nut N•m (kgf•m, lb•ft)
Engine oil drain bolt N•m (kgf•m, lb•ft)
Engine oil filter N•m (kgf•m, lb•ft)
TIGHTENING TORQUE
25 (2.5, 18)
35 (3.6, 26)
17 (1.7, 13)
18 (1.8, 13)
Model
Unit F40CET
Item
DIMENSIONS
PERFORMANCE
Overall length mm (in.)
Overall width mm (in.)
Overall height L mm (in.)
Transom height L mm (in.)
Weight L kg (lb.)
706 (27.8)
384 (15.1)
1,415 (55.7)
527 (20.7)
114 (251)
Full throttle operating range r/min
Maximum output kW @ r/min
Idling speed (in neutral) r/min
5,000–6,000
29.4 @ 5,500
800–900
ENGINE
Type
Displacement cm
3
(cu.in.)
Bore × stroke mm (in.)
Ignition system
Spark plug NGK
Spark plug gap mm (in.)
Control system
Starting system
Valve clearance (cold engine) IN mm (in.)
EX mm (in.)
Battery
Min. cold cranking amps (CCA/EN) amps at -18°C (-0.4°F)
Min. rated capacity (20HR/IEC) A·h
Alternator output V-A (W)
Starting carburetion system
4-stroke, L4
996 (60.8)
65 × 75 (2.56 × 2.95)
CDI system
DPR5EA-9
0.8–0.9 (0.031–0.035)
Remote control
Electric start
0.15–0.25 (0.006–0.010)
0.25–0.35 (0.010–0.014)
430
70
12-10
Prime start
DRIVE UNIT
Gear positions
Gear ratio
Trim and tilt system
Propeller mark
Forward-Neutral-Reverse
1.85 (24/13)
Power trim and tilt
G
FUEL AND OIL
Regular unleaded gasoline
25 (6.60, 5.50)
4-stroke motor oil
SE, SF, SG, SH, SJ
10W-30, 10W-40
2.0 (2.1, 1.8)
2.2 (2.3, 1.9)
Hypoid gear oil (SAE90)
470 (15.9, 16.5)
62Y-9-7C (E,F,ES) 4A 3/22/02 9:54 AM Page 4